Quick Question!

Have you ever purchased from PartSelect.com before?

228021-1-S-GE-WB06X10311        -Wave Guide Cover
228021-1-S-GE-WB06X10311        -Wave Guide Cover http://www.partselect.com/Schematics/GE/00110263i02.gif

Wave Guide Cover

PartSelect Number PS228021

This part works with the following brands: GE, Hotpoint & Kenmore.

Compare At

$14.30

You Save

$2.38

Your Price

$11.92
Order within the next 6 hrs and your part ships today!
Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 7 reviews What's this?
1-7 of 7
 

11 of 16 people found this instruction helpful

Parts Used:
  • Wave Guide Cover
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Grafals from Collingswood, NJ

The wave guide cover gets caught on fire when using microwave.

First removed the screw that holds the cover. Replace it and put the screw back on. Se acabó. So easy. I will go easy using harsh detergents that may had damage the cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 10 people found this instruction helpful

Parts Used:
  • Wave Guide Cover
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Norman L. from West St. Paul, MN

Original wave guide went flakey & fell apart

The actual repair required removing wave guide held in by one phillips screw was easy.

Thanks much for your rapid dependable delivery!!!

Norm Goetzke
West St. Paul, MN.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 7 people found this instruction helpful

Parts Used:
  • Wave Guide Cover
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Joseph from Staten Island, NY

Origional wave guide cover fell apart from harsh cleaners

Removed one Phillips screw, installed new wave guide cover, secured with phillips screw. Done

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 10 people found this instruction helpful

Parts Used:
  • Wave Guide Cover
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Larry from Colbert, WA

Old wave guide cover deteriorated from cleaning

Removed one phillips head screw, removed old cover, then replaced new cover and screw. Very easy and Parts Select made it happen. Will deal with them again. Thanks Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 3 people found this instruction helpful

Parts Used:
  • Wave Guide Cover
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Henry from Roseland, NJ

Just needed to replace the wave guide cover

Unscrewed the screw, removed old cover, place new cover in place and re-inserted the scrw.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 13 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers, Screw drivers
Customer: Arthur from Brooklyn, NY

Broken parts

Removed chassis cover, disconnected electric from old part, unscrewed bracket, removed old part, inserted new part, screwed in bracket, attached electric, and reattached chassis.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • Wave Guide Cover
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Esther from Brooklyn, NY

Cover fell apart

removed screw from inside wall. removed leftover board & replaced with new board & screw. good as new!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-7 of 7