BBB A-Plus
227998-1-M-GE-WB06X10288-Grease-Filter.jpg
227998-1-S-GE-WB06X10288-Grease-Filter.jpg 227998-2-S-GE-WB06X10288-Grease-Filter.jpg

Grease Filter

PartSelect Number PS227998

This metallic vent hood filter collects grease particles in the air from cooking.

This part works with the following brands: GE, Hotpoint & Kenmore.

In Stock

  • Compare At

    $12.76

  • You Save

    $2.13

  • Your Price

    $10.63
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-7 of 7

 

11 of 13 people found this instruction helpful

Parts Used

    • Grease Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerD. Lynette from Ogden UT

Replace grese filters (2)

INSERTED NEW GREESE FILTERS BY UNSCREWING FAN AND LIGHT HOLDER OVER RANGE. THE NEW FILTERS WERE 1/4 INCH SHORTER THAN OLDER FILTERS AND ARE LOSER THAN THE ORIGINAL FILTERS, BUT THEY WILL WORK. NOT SURE IF I INSERTED THEM CORRECTLY, AND WOULD LIKE TO SEE INSTRUCTIONS ON HOW TO INSERT FILTERS OF THAT TYPE. THANK YOU FOR YOUR FAST AND CURTIOUS SERVICE.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyVery Difficult

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers

CustomerJoanne from Front Royal VA

Getting to the charcoal filter

Follow directions in the manuel, but getting the grill off to get to the where the filter goes was very difficult, the springs kept poping around. Finally got together. This is the 2nd time I have replaced this grill, don't remember it being this difficult before.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBarbara from Littleton CO

None

I had no troubles!

Thank you...

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDianne from Westminster CO

Turntable made a loud noise

First I unscrewed the screws that were holding the panel underneath. Then I removed the panel and removed the screws that held the turntable motor in place. Then replaced the old motor with the new and screwed everything back into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

    • Grease Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerYOLANDA from SKOKIE IL

Greasey filters

JUST TOOK THE OLD FILTERS OUT REPLACE THE NEW SET WITHOUT ANY TOOLS.WAS EASY TO INSTALL.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 8 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSTANLEY from SANDOWN NH

Grille broke in several places

Removed two screws then took off decorative panel. Put hinges on and attached springs, mounting decorative panel onto the grille. placed back in unit and replaced two screws, viola!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Grease Filter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerLaura from Sugar Grove IL

Dirty filter - replacement filter installed

Manually with no tools

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-7 of 7