224041-1-S-GE-WB02X10773        -Pawl Latch
224041-1-S-GE-WB02X10773        -Pawl Latch 224041-2-S-GE-WB02X10773        -Pawl Latch

Pawl Latch

PartSelect Number PS224041

This part is electrically designed for securing the door of the microwave while it’s in use.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Door not closing properly.
  • Compare At

    $5.89
  • You Save

    $.98
  • Your Price

    $4.91
In Stock
Order within the next 11 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 2 reviews What's this?
1-2 of 2
 

5 of 11 people found this instruction helpful

Parts Used

  • Pawl Latch

Level of DifficultyA Bit Difficult

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerwalter from palm bay FL

Broke door latch

Pryed off frame from around latch,with screwdriver,took off old latch keeping eye on spring and how it comes off.Going on was a no brainer had to pry side a little with screwdriver the new latch fell into place don't forget the spring,the frame slipped right in all fixed oh yes i did take the door off prying top pin with screwdriver be carefull it is all plastic.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 9 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerANTHONY from SARASOTA FL

Door latch broke

The best part about this fix is that the local appliance place and GE told me they did not sell the latch for this door and that you can only buy door as an assembly for $280.00. My part model # did not register any parts on partselect.com however when I looked up using the search for ge/microwave/door parts/ it showed me three different latches which two of the three would work. I snapped out rear door frame. Then I pushed up and pulled out the door latch. There is no need to take apart metal frame insert. The door itself come of just buy pushing up then pulling out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2