Quick Question!

Have you ever purchased from PartSelect.com before?

2203383-1-S-Frigidaire-5304464343-DAMPER ASSEMBLY
2203383-1-S-Frigidaire-5304464343-DAMPER ASSEMBLY 2203383-2-S-Frigidaire-5304464343-DAMPER ASSEMBLY http://www.partselect.com/Schematics/Frigidaire/IVP5734N.gif

DAMPER ASSEMBLY

PartSelect Number PS2203383

This is an exhaust damper assembly for a microwave, which is also known as a microwave vent damper. The damper directs air flow through the vent duct from the top or rear of your microwave, depending on your model, to allow the air to flow outside and prevent outside air from coming in. You will need to uninstall your microwave from the wall to access the exhaust damper. Once you have gained access to the damper, simply slide the old part out, and slide the replacement part in. This is an OEM replacement part that is sourced directly from the genuine manufacturer.

This part works with the following brands: Frigidaire, Gibson, Kelvinator, Kenmore, Tappan & White-Westinghouse.

Compare At

$33.86

You Save

$5.64

Your Price

$28.22
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.5 / 5.0, 1 reviews What's this?
1-1 of 1
 

14 of 16 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: More than 2 hours
Tools: Pliers, Screw drivers
Customer: Mark from Morrisville, NC

Wanted to switch mv from recirc vent to venting outside

The mv was originally installed as recirc venting as there was no outside vent. I hated the steam and smoke just being put back into the kitchen.

I removed mv unit, ran a vent thru cabinets, thru attic, to outside vent. Installed new part on top on mv, installed mv and hooked up to new vent.

Works great now. Getting a good tight seal was difficult because the area the vent ran was so small.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-1 of 1