BBB A-Plus

Lower Spray Arm Support

PartSelect Number PS2202653

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly
In Stock

  • Compare At

    $31.48

  • You Save

    $5.25

  • Your Price

    $26.23
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 NEXT > 16-21 of 21

 

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJames from Calhoun GA

Lower spray arm support broke

Ordered part and it was delivered the next day with the normal shipping! Very easy repair! Ordered a new basket because the old was breaking down!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMatthew from North falmouth MA

Fork snapped fan off which melted some parts

Well somehow when no one in the family was watching, a fork got below the dish rack and knocked the fan off which melted the spray nozzle and the jump-up sprayer as well as snapping the lower spray arm support.

All the parts are real easy to put on, no tools required, just turn right to tighten! Also you need to know which part goes on top of the other, but its not hard to figure out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Lower Spray Arm Support

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerScott from Mickleton NJ

Cracked plastic arm support

Relatively easy annd inexpensive ($20) DIY repair. However, to have Maytag repairman complete job would have been FAR more costly. Thanks to PartsSelect for very quick delivery of OEM part. Scott in NJ

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerRobert from Jayess MS

Broken nozzle preventing clean dishes.

Appliance was extremely easy to troubleshoot and locating the needed parts were also, Thanks to Partselect.com
Unscrewed the nut holding the Arm assy. and installed new components!! My daughter really
thanks you!!!!!!!!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Lower Spray Arm Support

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerkristen from hampton VA

A knife fell in the botton of the dishwasher and broke the support spray arm

i took 3 screws out of the botton where the SUPPORT, SPRAY ARM is located and put the new one in then put the 3 scewsback in it was really eazy it took less then 5 mins and now my dishwasher is like new and only cost me 6 dollars and only took 3 days after i orderd to get the part thanks part select if i have any more problems with any of my appliances i will be back thanks again

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

    • Lower Spray Arm Support

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

Customernathan from gallatin TN

Broken spray arm

simple just unscrewed the arm and installed new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 NEXT > 16-21 of 21