2202596-1-S-Whirlpool-Y912709-Adjustable Peg Clip
2202596-1-S-Whirlpool-Y912709-Adjustable Peg Clip 2202596-2-S-Whirlpool-Y912709-Adjustable Peg Clip 2202596-3-S-Whirlpool-Y912709-Adjustable Peg Clip http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/53706.gif

Adjustable Peg Clip

PartSelect Number PS2202596

This dishrack clip is used with dishwasher dishracks that have adjustable pegs. Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Compare At

    $8.48
  • You Save

    $1.41
  • Your Price

    $7.07
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 37 reviews What's this?
 

130 of 254 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerGina from West Alexandria, OH

Wheel had broken off along with the folding tines' clip

All I had to do was to snap the parts into place. I also had someone come here to find a leak in my dishwasher. It was in the latch and seal that kept the soap dispenser closed. They wanted to charge me over $50 when the part only cost less than $9 with shipping. I just ordered it and installed it myself. Piece of cake!

Help other customers find the most helpful instructions.

Were these instructions helpful?

65 of 126 people found this instruction helpful

Parts Used

  • Adjustable Peg Clip

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

Customerroger from guilford, VT

Broken part

clipped in the replacements and installed the assembly. Easy and thanks, PartSelect.

Help other customers find the most helpful instructions.

Were these instructions helpful?

65 of 127 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerGreg from Towanda, PA

Clips holding folding tines broken

The clips holding the folding tines on the lower rack had broken, so the folding racks were flopping around. I entered the model number an PartSelect popped up exactly the right diagrams to find the parts I needed - I even found the handle for the silverware tray that I didn't know was missing. I ordered before noon, and the parts arrived the next day, all at a very reasonable cost (even shipping!) the parts just snapped in place. I'm very, very pleased.

Help other customers find the most helpful instructions.

Were these instructions helpful?

66 of 130 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerManfred from Fredricksburg, VA

Some of the fold up/down tines in the lower basket were defective as well as the door handle was broken

The wheels and clip were just snapped in to replace old or missing ones. The door latch required the inside cover of the door assembly to be loosen enough to remove the old latch and replace the new latch.
approximately ten screws were involved.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Adjustable Peg Clip

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerRichard T. from Atlanta, GA

Adjustable rack had broken

Simply had to replace the clips in the correct position. Would have been a five minute job if I had noticed which way around the old parts went before removing them from the dishwasher to find replacements. It's amazing hoe many permutations there were before it all fit together perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?