2202596-1-S-Whirlpool-Y912709-Adjustable Peg Clip
2202596-1-S-Whirlpool-Y912709-Adjustable Peg Clip 2202596-2-S-Whirlpool-Y912709-Adjustable Peg Clip 2202596-3-S-Whirlpool-Y912709-Adjustable Peg Clip http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/53706.gif

Adjustable Peg Clip

PartSelect Number PS2202596

This dishrack clip is used with dishwasher dishracks that have adjustable pegs. Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Compare At

    $8.48
  • You Save

    $1.41
  • Your Price

    $7.07
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 37 reviews What's this?
1-5 of 37
 

475 of 479 people found this instruction helpful

Parts Used

  • Adjustable Peg Clip

Level of DifficultyDifficult

Time to do repair:30 - 60 mins

Tools

Customerfrank from kenmore, WA

The dish rack had two sets of adjustable tines that had never worked.

I ordered two clips just in case. Turns out I needed both of them. Since I hadn't seen the adjustable tines installed, it took some time to figure out how to put the assembly together.

For some reason I had the dishwasher for 7 years before it occurred to me to order the replacement parts. It's much more efficient to use with the adjustable tines properly installed as I can load approximately 25% more plates than before.

Help other customers find the most helpful instructions.

Were these instructions helpful?

371 of 380 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

Tools

CustomerMaxine from Richmond, VA

Interior plastic parts broken

Snapped new parts into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

368 of 374 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerPenny from Perry, UT

Clips to hold the folding tines on the bottom rack were broken; also replaced some wheels on same rack.

It took awhile to figure out how to install the peg clips; I still have my manual, but there is no diagram or picture to show how they are installed (and not on the internet either - not even Amana's site), but I figured it out... so here are the instructions I have created.

On the rear part of the lower rack, you will notice that there is a row of larger spaces between the bars; we are only concerned with the 3 farthest right spaces & the 6 bars that create them.

Install both clips with the ‘flange’ that wraps around the bar inside the square; this will position the clamps that hold the clip in place on the outside edge of the bar.

Place one clip on the far right bottom bar; place another clip on the left hand side of the 3rd space (4th bar from the bar the other clip was attached to on the right).

There are small ‘legs’ that protrude from the folding tines on one end of each; place the tines so that the 2 large tines on both are on the outside, the 4 straight tines are on the inside of the squares when they are folded down, which will put the little ‘legs’ down by the far left square.

Snap the tines into the small clamps on the ends of the clips, so that the loops on the ends will rotate up into the larger clamps when the straight tines are folded down, which will hold them in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

144 of 268 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerDEBBIE from DES MOINES, IA

Missing parts

Over the years I had wheels and clips turn up missing. I could not find my model number. It was not where it was supposed to be so I used the great pictures to figure out what I was missing. I guessed right because they fit perfectly. I had three wheels missing on my lower rack. I cannot believe I messed around opening and closing it for so many years without these easily ordered wheels. It took me all of 2 minutes to add everything. The best part of this order was the shockingly fast delivery time. I ordered the parts after midnight on tuesday and they were delivered, at my doorstep, on thursday. . . Just regular delivery. Great job by this company. . . . I will return!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

130 of 254 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerLiz from Alexandria, VA

Dishwasher lower basket suffered from wear and tear

Slipped into place the two wheels on lower basket that had gone missing; removed brackets for adjustable section that were broken and easily snapped knew ones into place; connected handle to flatware basket and replaced the old one. Why we didn't do this years ago!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 37