Quick Question!

Have you ever purchased from PartSelect.com before?

2202520-1-S-Whirlpool-Y901862-Door Spring Kit
2202520-1-S-Whirlpool-Y901862-Door Spring Kit 2202520-2-S-Whirlpool-Y901862-Door Spring Kit http://www.partselect.com/Schematics/Maytag/33505.gif

Door Spring Kit

PartSelect Number PS2202520

Also included in this kit is a nylon insert.

This part works with the following brands: Maytag, Jenn-Air.

This part works with the following products: Dishwasher.

This part fixes the following symptoms:

  • Door latch failure.

Compare At

$17.05

You Save

$2.84

Your Price

$14.21
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

20 of 22 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Rock from Freeport, ME

Right side door springs broken

With the dishwasher door open remove the 3 srews connecting the top of the dishwasher to the bottom of the kitchen counter top. Remove the lower access panel from the dishwasher and lower the dishwasher about 1/4 inch in the front and back of the dishwasher). Once you have lowered the dishwasher enough slide the dishwasher out about 6 inches (enough to gain access to the door springs on the left and right side). Remove all broken spring parts and replace using new springs. The left side of the door contained a single heavy duty spring and the right side of the door contained a heavy duty and light duty 'helper' spring. I replaced only the right side springs since the left side spring was in excellent condition. When the springs are installed slide the dishwasher back into its original position and raise the dishwasher back up to its original height using the front and back adjustment screws. Replace the 3 screws holding the top of the dishwasher secure to the bottom of the countertop. Ensure that the door opens, closes and latches smoothly and then replace the lower access panel. Job done.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers, Wrench set
Customer: mike from wallingford, PA

Broken spring

had to pull the unit out abour 6" and simly replaced the springs - it was easy

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2