| |
3 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerJames L. from Lilburn GA
Burner switch was malfunctioning.
1. Removed all four switch knobs (to be replaced with new knobs purchased with the replacement switch.(unnecessary if you are not going to replace all the knobs) 2. Removed the switch plate assembly by removing two sheet metal screws. 3. Inverted plate assembly and removed five wires and then removed two additional screws that secured the faulty switch to the plate assembly. 4. Reconnected the five wires and attached the new switch to the plate assembly. 5. Re-positioned the assembly on the cooktop and secured with the two sheet metal screws. GAME OVER!
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerThomas from Discovery Bay CA
Both burner switches failed intrenally
simply remove and replace th switches using a screw driver an a pair of needle nose pliers
|