2200442-1-S-Whirlpool-Y308612-Heating Element - 240V
2200442-1-S-Whirlpool-Y308612-Heating Element - 240V 2200442-2-S-Whirlpool-Y308612-Heating Element - 240V 2200442-3-S-Whirlpool-Y308612-Heating Element - 240V

Heating Element - 240V

PartSelect Number PS2200442

This heating element is used for electric dryers. This part does not include a thermal fuse or a heat shield.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Compare At

    $147.68
  • You Save

    $24.61
  • Your Price

    $123.07
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Thermal Fuse

Part Number 2030126

This thermal fuse is mounted on either the heating element or burner tube housing.

$19.93
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.4 / 5.0, 3 reviews What's this?
1-3 of 3
 

28 of 35 people found this instruction helpful

Parts Used

  • Heating Element - 240V

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Screw drivers

CustomerEugene from McAdoo PA

No heat in dryer

I removed front cover of dryer and found heating unit. I needed the detailed drawings from the PartSelect web site to help me find how to get the front cover off. It was easy after that changing out the sensors and reinstalling the heating unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 17 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerGilbert from Hollister CA

Dryer wouldn't heat

First I removed the two screws from the dryer front cover (located just under door)I Then swung font cover up and off it's latches. Exposing drum asy and heating element. Using a nut driver to remove two hold down screws and disconnect electrical wires from heating element. Really simple! took me approxmatly 20 minutes and this included vacuuming inside motor area with a shop vac.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 15 people found this instruction helpful

Parts Used

  • Heating Element - 240V

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerSteven from Town Creek AL

An underwire form a bra shorted the element burning it out

Knowing most mfgs. put prints under the conturo panal we started there.
Diagonstics required a multi meter.
The part was removed and the internet serched.
My local parts center was more expensive and would have to order the part. I called Partselect
found exactly what i needed. placed the order with 3 to 5 day ground. Fedex arived the next day. The new part was installed and the dryer smoke tested. The dryer works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-3 of 3