2200270-1-S-Whirlpool-Y303836-Blower Wheel with Clip
2200270-1-S-Whirlpool-Y303836-Blower Wheel with Clip 2200270-2-S-Whirlpool-Y303836-Blower Wheel with Clip http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/36762.gif

Blower Wheel with Clip

PartSelect Number PS2200270

This comes with a metallic hub clip to hold it firmly in place.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.
  • Takes too long to dry.
  • No heat or not enough heat.
  • Will not tumble.
  • Too hot.
  • Compare At

    $19.03
  • You Save

    $3.17
  • Your Price

    $15.86
In Stock
Order within the next 4 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Blower Wheel Clamp

Part Number 600181

This clamp is used for the blower wheel.

Order within the next 4 hrs and your part ships today!
$4.87
In Stock

Tumbler and Motor Belt

Part Number 2200550

At 100" in length, this dryer drum belt is 3/8" wide and has 5 ridges. This is the belt that is from the tumbler to the main drive motor.

Order within the next 4 hrs and your part ships today!
$12.07
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 141 reviews What's this?
46-50 of 141
 

1 of 2 people found this instruction helpful

Parts Used

  • Blower Wheel with Clip

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers, Socket set

CustomerStephen from Water Mill, NY

Noise when dryer turned on,during dryer, and for a bit after it stopped

I followed the other descriptions as to parts removal. But on my model I could not remove the lint filter housing by removing the four screws inside the drum. One screw wasn't visible nor accessible since it faced inside the dryer body. In order to remove it I had to take off the two side brackets that held the drum in place. Removing the side brackets removed the housing (I didn't actually need to remove the screws inside the drum) and enabled me to complete the installation. The drum did come loose slightly but was easily aligned when I put everything back together. Also the blower wheel, besides the wheel clamp, is held on with a special clip on the spindle that I had to pry off with a screwdriver and pliers. The whole process was a bit more complicated but not that difficult.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Blower Wheel with Clip

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerJeff from Simpsonville, SC

Dryer was making load noise at start, then got quiet. The blower wheel was loose (worn in the center) and was rattling.

Use philips head screwdriver to remove 2 front lower screws. Pull out on bottom of front and turn it aound and to the left (to keep from having disconnect wires). Using sockets, remove lint filter cover (one screw was hard to get to; may need to take some other screws loose to get to it).
Remove the small heat shield at the bottom, then remove the cover of the blower fan assembly.
Use either small snap-ring pliers or a scre driver to remove snap ring, and use pliers to remove the clamp in the wheel.
Re-assemble.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Blower Wheel with Clip

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Screw drivers

CustomerArlene from Hanford, CA

Dryer was making a loud noise while running

My husband took the lower right panel in the back of the dryer off to check to see if the barings in the motor were worn out making the loud noise. the shaft of the motor spun without a loud noise as he turned it by hand but from the front of the dryer could hear a rattle of something loose. He slid his hand into the exhaust vent from the back and reached all the way through to the front where he could feel that the fan(blower wheel) was loose and turning free from the motor shaft (which revealed itself to be the source of the loud noise) got the part number and ordered the part from you and using the snap ring pliers to remove the old blower wheel put the new one on and now our dryer runs great and quiet. one web site that was helpful was fixitnow.com thanks for all your help

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:More than 2 hours

ToolsNutdriver, Pliers, Screw drivers, Wrench set

CustomerGary from Huntington Beach, CA

Blower was rattling

Removed the front panel with by removing 2 screws. Removed the control panel bezel by removing 2 screws. Removed the control panel by removing 3 screws, and 3 wiring harness edge connectors. Removed front panel of dryer after disconnecting the door switch. Removed plastic ductwork from dryer. Removed front of blower housing. Removed blower lock ring, clamp and them blower. Installation is reverse of removal.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Blower Wheel with Clip

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers, Socket set, Wrench set

CustomerGary from Erving, MA

Noise, rumbling

Unplug dryer
Remove front (2 screws at bottom)
From bottom lift out and up to release top bracket
Move front panel gently to the left not disturbing wires
Remove blower cover with nut driver
Remove expansion clip on shaft with expansion clip pliers
Remove blower clamp with pliers
Slide blower wheel off
Replace blower wheel an reassemble

Help other customers find the most helpful instructions.

Were these instructions helpful?

46-50 of 141