2200270-1-S-Whirlpool-Y303836-Blower Wheel with Clip
2200270-1-S-Whirlpool-Y303836-Blower Wheel with Clip 2200270-2-S-Whirlpool-Y303836-Blower Wheel with Clip http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/36762.gif

Blower Wheel with Clip

PartSelect Number PS2200270

This comes with a metallic hub clip to hold it firmly in place.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.
  • Takes too long to dry.
  • No heat or not enough heat.
  • Will not tumble.
  • Too hot.
  • Compare At

    $19.03
  • You Save

    $3.17
  • Your Price

    $15.86
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Blower Wheel Clamp

Part Number 600181

This clamp is used for the blower wheel.

$4.87
In Stock

Tumbler and Motor Belt

Part Number 2200550

At 100" in length, this dryer drum belt is 3/8" wide and has 5 ridges. This is the belt that is from the tumbler to the main drive motor.

$12.07
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 141 reviews What's this?
26-30 of 141
 

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers, Socket set

CustomerBrian from Palm Harbor, FL

Drum bearing guides worn through - general rebuild

Removed two screws on bottom of front panel. Lifted bottom of front panel, it then it dropped down and was moved to the left side. Removed 4 socket screws and removed drum front cover. Replaced felt strip, removed belt and replaced. Replaced two idler pulleys in back. Removed blower housing front cover, removed blower wheel and replaced. Installed front drum glides after drilling out rivets from the old glides. Vacuumed entire inside thoroughly and reassembled.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Blower Wheel with Clip

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerRonald from Cadet, MO

Making loud noise

Removed (2) screws at bottom of dryer. Removed about 5 screws on blower housing. Used pliers to remove clamp and replaced the blower. Installed everything in reverse. I looked at what others did before me and it made it easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerAnthony from Citrus Heights, CA

Horrible rattle - sounds like drying a load of cleats

I followed the instructions given by other DIYs. The rubber band for the belt was a great suggestion, however having no rubber band nearby, I used a zip-tie that worked out perfectly.

The only tool that I wished I had is a pair of split ring pliers. Not having a pair, used a pair of needle nose and a very small screw driver to provide the leverage to remove the washer.

After following the instructions that came with the belt on how to properly align it to the motor wheel and tension wheel, I plugged everything back in and started it up. Sounded like it was brand new.

I decided not to replace the rollers or drum guides as they looked to be in good shape.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Blower Wheel with Clip

Level of DifficultyA Bit Difficult

Time to do repair:1- 2 hours

ToolsPliers, Screw drivers, Wrench set

Customerjohn from paw paw, MI

Bad rumbling noise

Found the answer online, ordered the blower from here. I used a pair of scissors in place of a snap ring pliers. Otherwise went smoothly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:1- 2 hours

ToolsScrew drivers, Socket set, Wrench set

CustomerJames from Hicksville, OH

Dryer noisey

took off front of dryer then front of drum supports then took the blower fan off and replaced it. pulled the drum out replaced the shafts and rollers put it back together was not a very hard job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

26-30 of 141