2200270-1-S-Whirlpool-Y303836-Blower Wheel with Clip
2200270-1-S-Whirlpool-Y303836-Blower Wheel with Clip 2200270-2-S-Whirlpool-Y303836-Blower Wheel with Clip http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/36762.gif

Blower Wheel with Clip

PartSelect Number PS2200270

Manufacturer Part Number Y303836
Manufactured by Whirlpool

This comes with a metallic hub clip to hold it firmly in place.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Noisy.
  • Takes too long to dry.
  • No heat or not enough heat.
  • Will not tumble.
  • Too hot.
  • Compare At

    $19.03
  • You Save

    $3.17
  • Your Price

    $15.86
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Blower Wheel Clamp

Part Number 600181

This clamp is used for the blower wheel.

$4.87
In Stock

Tumbler and Motor Belt

Part Number 2200550

At 100" in length, this dryer drum belt is 3/8" wide and has 5 ridges. This is the belt that is from the tumbler to the main drive motor.

$12.07
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.2 / 5.0, 141 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Socket set

CustomerRoger from Owatonna, MN

Blower fan was broken and spinning on the motor shaft

Removed front cover, removed housing cover, took old fan off, installed new fan, put covers back on.
Your instructional video was very helpful. He told which screws to remove to get the covers off. I was unsure about how access the fan until I watched. Well done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:1- 2 hours

ToolsNutdriver, Pliers, Screw drivers

CustomerCody from Nebraska City, NE

Clunking noise when first turned on

I took the access panel off the back, realized that belt was in very bad shape. Ordered a belt when I got that changed I put it back together and it still had a clunking noise. Found out that the blower wheel was rounded off where it goes over the shaft. So to change that I took the two front screws off, then the four hex screws off of the tumbler guide. There were eight or so screws over the blower wheel, took those out and the clamp on the blower wheel then used the snap ring pliers for the snap ring, then changed the wheel. Problem solved. This website is very helpful I would not have attempted to fix my dryer without this website.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Blower Wheel with Clip

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers, Socket set

CustomerRICHARD from ROBINSON, IL

Blower wheel hub worn out

First remove 2 screws on bottom of front panel,pull panel out from bottom to remove. Then remove 4 screws,2 on each side to remove tub support. Then remove approx. 6 Screws on fan access cover to expose fan. Then remove snap ring and clamp on fan hub. Pull fan off and push new fan on and reverse procedure.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Blower Wheel with Clip

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Wrench set

CustomerCARRIE from NEW BAVARIA, OH

Loud knocking in the dryer

My husband took off the front panel and noticed that the center of the wheel was melted. We went on to this website and confirmed the noise with other customers. We ordered the part - received it in 1 day and the dryer was repaired and back together within a 1/2 hr. Part was as is - istructions excellent.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Blower Wheel with Clip

Level of DifficultyReally Easy

Time to do repair:30 - 60 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerHenry from Newark Valley, NY

Fan was noisy, indicateing that the fan hub was worn, letting it wobble.

I removed the two screws and removed the front panel, next I removed the fan cover that also directs the air movement into the drying tub. I then removed the external snap ring that held the fan in place on the shaft. The fan very easily slid right off of the shaft. It was reassembled in the opposite order. A very easy procedure. The entire procedure was not more than one hour.

Help other customers find the most helpful instructions.

Were these instructions helpful?