2195246-1-S-Whirlpool-Y04100166-Surface Element - 8"
2195246-1-S-Whirlpool-Y04100166-Surface Element - 8" 2195246-2-S-Whirlpool-Y04100166-Surface Element - 8" 2195246-3-S-Whirlpool-Y04100166-Surface Element - 8" http://www.partselect.com/Schematics/Maytag/33694.gif

Surface Element - 8"

PartSelect Number PS2195246

This burner with reinforced delta frame carries 2100W and 240V.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.
  • Compare At

    $33.05
  • You Save

    $5.51
  • Your Price

    $27.54
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Electric Surface Element - 6"

Part Number 2195245

This surface burner with reinforced delta frame carries 1250W and 240V.

Order within the next 7 hrs and your part ships today!
$28.47
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 20 reviews What's this?
 

4 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Richard from Framingham, MA

Replaced surface elements and knobs

Removed surface elements by pulling straight out of electrical fitting. Replaced with surface elements purchased online by pushing directly into electrical connector.
Back of burner knob larger than post on stove. These were returned to PartSelect for credit.
All items ordered arrived with a day of placing order - waiting on confirmation that the knobs have been received.
I will definitely use PartSelect in the future.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Albert from Snellville, GA

Connector for burner broke old and well used

Had to drill out screw for old connector bracket and also had to extend wires from controls this took most time. Once done with this used wire cutters to strip back insulation and then put the whole mess back together also used a larger wire nut to reconnect wires.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools:
Customer: John from Dublin, GA

Burner points and recepticle pitted

removed burner and recepticle and replaced new one. You don't have any place to comment on service, so I'll put it here. I talked to Herb and ordered parts with him on a Monday afternoon. He was very helpful. The part came Thursday about noon and I immediatly installed parts and my wife cooked supper (thats southern for the evening meal) that night. A really wonderful experience. Thank's Herb.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Customer: Walter from N. Richland Hills, TX

Both the 8'' burner and the vent fan didn't work.

1st-turned off breaker, 2nd- took out the two screws that hold the control panel and lifted it up so I could remove the surface unit switch,3rd- removed wires from old switch and securing nut and removed old switch,4th- installed new switch and plugged in wires, then turned on breaker to see if burner would work and it did. 5th-turned off breaker again and removed the wires from the fan switch and used nut driver to remove retainer nuts,6th-installed new fan switch and plugged in wires, 7th- put control console back in place and the two screws that hold it in place. Turned breaker back on and everything worked.Didn't use the burner receptacle or burner.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Alfred from Fayetteville, NC

Old stove drip bowls needed replacing

Removed heating elements and dropped new drip bowls in and replaced new elements

Help other customers find the most helpful instructions.

Were these instructions helpful?