2195246-1-S-Whirlpool-Y04100166-Surface Element - 8"
2195246-1-S-Whirlpool-Y04100166-Surface Element - 8" 2195246-2-S-Whirlpool-Y04100166-Surface Element - 8" 2195246-3-S-Whirlpool-Y04100166-Surface Element - 8" http://www.partselect.com/Schematics/Maytag/35316.gif

Surface Element - 8"

PartSelect Number PS2195246

This burner with reinforced delta frame carries 2100W and 240V.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Element will not heat.
  • Compare At

    $33.05
  • You Save

    $5.51
  • Your Price

    $27.54
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Electric Surface Element - 6"

Part Number 2195245

This surface burner with reinforced delta frame carries 1250W and 240V.

Order within the next 7 hrs and your part ships today!
$28.47
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 20 reviews What's this?
1-5 of 20
 

145 of 290 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Donna from Charlotte, NC

Cooktop was looking old and worn though there was no working problem.

All of the "old" pieces were very easily removed and replaced with the new pieces. The update looks terrific and works just fine!

Help other customers find the most helpful instructions.

Were these instructions helpful?

42 of 48 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: george from burke, AL

Wanted to update surface parts to a very old (27 yrs?) jenn-air range on an island

The first task was to find the rings, drip bowls and elements on the "PartSelect" webpage. It was surprising easy, especially since I have no experience whatsoever in replacing range parts. The ordering was straight-forward, and most of the parts arrived within a week, a couple were back-ordered, but arrived a week later. Instillation was easy - just unplug elements, lift parts out, and insert new parts. I made a mistake in ordering - for the left side of the range, no adaptor rings are needed. I returned these excess parts to PartSelect, and within a week, they refunded the costs of these parts. Overall, I'm very please with the parts and service.

Help other customers find the most helpful instructions.

Were these instructions helpful?

22 of 32 people found this instruction helpful

Parts Used:
Level of Difficulty: Difficult
Time to do repair: 15 - 30 mins
Tools:
Customer: Lucille from Mattoon, IL

Wanted to "renew" cook top

The drip pans, burner knobs and electric surface elements are easily removed and replaced. The new receptacles for the burners were NOT easy to replace, but electricians were on hand to install when they replaced the cook top into the new counter top. Even the electricians had to read the instructions - and remove the control panel to replace one of the receptables. Looks like a new cook top.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used:
  • Surface Element - 8"
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Shalom from Brookfield, CT

No contact -burner male to female in unit.

the replacement fit well. the burner is ok. if i need to change the female part receiving the prongs, what do i do?
or maybe there's another reason. [as, naturally one must pull it out to clean.]

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Daniel from Magalia, CA

Burner would not get hot.....only warm. connector was worn as well.

First, I removed the two screws holding the element in place. I removed the element from the connector. I then removed the trim ring and drip pan. I unscrewed the retaining screw holding the connector and pulled out the connector about three inches and disconnected the two wires leading to from the old connector. I removed the old connector. I then connected the two wires leading from the new connector and fasten the connector to its retainer with a screw . I reinserted the drip pan and trim ring and plugged the new element into the connector. I turned on control knob to high and tested the element., which glowed red hot. Job completed and customer very well satisfied..

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 20