This bake element is 17 inches wide. It has a terminal depth of three inches, and a total element length of ninteen inches. This element is intended for use with some electric ovens.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Estha R - March 17, 2022
Verified Purchase
Worked as expected
Worked perfect and oven is working again.
★★★★★
★★★★★
AL F - March 9, 2022
Verified Purchase
Jenn air oven
The part I ordered was for my 33 year old oven. Oven still works great.
★★★★★
★★★★★
Linda I - December 2, 2021
Verified Purchase
Jenn-Aire Bake Element -
Part was perfect, installation was a breeze and the prompt shipping was really appreciated. Would happily purchase from this company again.
★★★★★
★★★★★
Corinne M - September 8, 2020
Verified Purchase
great
Great price and easy to install. Thank you so much.
★★★★★
★★★★★
Don J - January 23, 2019
Verified Purchase
Easy repair
I was very happy with the part and how quickly I got it
★★★★★
★★★★★
Nigel O - February 27, 2018
Verified Purchase
Perfect fit in W122
Part areived fast, perfect condition and packed safely. Fit perfectly and there were even basic instructions on the invoice. Saved me from buying a new oven!
★★★★★
★★★★★
Jeffrey R - January 30, 2018
Verified Purchase
What I ordered
Part came quickly and was what I ordered.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 17 reviews.
What's this?
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bake element burned out/arced
Removed old element, 2 screws, cleaned oven , 60 minutes, replaced with new element, working like new, wife thoroughly impressed...
William from GAINESVILLE, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would not heat up
my wife removed two screws and removed clips with pliers. We ordered part (2 days) it was fast. Installed in less than 5 min. and I only have one arm. We tried to find part locally but with no model # the parts houses could not find it. We found it on your site in less than 10 min. Your graphs and photos made it super easy. Will pass a
... Read morelong your site to others. Thanks for being so helpful.
Read less
gerard from bentonville, AR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element was burned out
remove old one and installed new one quick and easy thank you
Gary from chardon, OH
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced the heating element
It would have been a very easy job if the one wire had not fallen inot the back. I could not reach it and fried to figure out how to get in the back to no avail. Finally I took a piece of wire coat hangerm and bent it and then fished it out. The packing around the hole compressed while I was trying to get the wire and I thought I wpuld ha
... Read moreve to replace it, but overnight it resumed its original size. It should have probably taken less than thirty minutes.
Read less
Paul from Newark, DE
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven temp would not get above 200
downloaded instructions from your website on how the part went in the oven, ordered part, and installed when it got here. shut off the breaker (found out it was mis-marked in my breaker box!) undid two screws, pulled off two clamps reinstalled and we were baking by dinner! thank you!
eleanor from baton rouge, LA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Old bake element burned out
1. Removed screws and detached push on cannectors 2. Removed old element 3. Pushed eclectrial connectors onto new element and attached new element to oven with screws.
Cecil C. from St. Johns, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
20 of 27 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The lower heating element stopped working.
The heating element is held in place by two phillips screws which were rusted fairly tight, visible at the back of the oven. I tapped my screwdriver with a hammer as I loosened them. (I would have used liquid wrench if the hammer did not work) Two wires are fastened to the element by two clips that you can slide off by hand. Slip the wir
... Read morees off the old element and onto the new element and install the two screws and you are done.
Read less
brian from morga hill, CA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bottom burner burned out
same
doug from magnolia, AK
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
0 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Bake Element Stopped Heating.
I removed one screw easily. The other screw was difficult to remove without stripping it. I sprayed wd 40 and let it sit overnight. The next day, my husband sprayed it again and after trying several different size phillips screwdrivers, he got the second screw out. He easily removed the element and then the two wires from it. He
... Read more attached the two wires and replaced the screws. We tested it and it worked. The best part is: my husband scrubbed the oven before putting all the parts back!
Read less
Paula from Green Village, NJ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
oven would not heat
Checked the element to see if it was open or no resistance, it was open e.g. First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...)
Dane from Evansville, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wanda
December 9, 2019
What part do i need for my oven when the heating element does not keep coming on? It heats, then does not start again.
For model number W188
Hello Wanda and thanks for writing.
It certainly sounds like a faulty PS11757476 test and replace if needed. We hope this helps. Please contact us anytime.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Barbara
November 2, 2022
I have a jenn-air wall oven with microwave and the baking element in the oven is not working. I am trying to find the correct replacement part and wondering if I can replace it myself!
For model number W225
Hello Barbara, thank you for reaching out. The bake element compatible with your model is part number PS11757476. We have attached a video link to assist you with the replacement of the baking element. If you require assistance to place an order, please contact customer service. We hope that helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
