4 of 4 people found this instruction helpful
- Spark Switch - 270 Degrees
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsPliers, Screw drivers
CustomerAnthony from Fishkill NY
Switch spark would not stop sparking.
I was able to remove the top cover by unscrewing 10 srews. Once the cover was off I removed the plastic shield above the damaged switch. Then unplugged the 2 wires off the switch. Pulled the faulty switch out. Replaced it with the new switch and plugged in the 2 wires. Reinserted the plastic cover put the top cover on and put the screws in place. Tested the new switch and worked fine.