| |
9 of 10 people found this instruction helpful
Parts Used
-
- Top Burner with Electrode - Medium - 9k
Level of DifficultyA Bit Difficult
Time to do repair:1- 2 hours
ToolsScrew drivers
CustomerDave from Livonia MI
Two of the four burners would not ignite when lighting the stove.
I thought the problem was with the ignitors/burners since they appeared to be worn. As it turned out, I needed the spark ignitor, which is a "brain box" located under the range cover. It connects all of the ignitor/burners and sends current to the ignitors to give it the "spark" to ignite the gas. It was really easy to replace.
|
5 of 6 people found this instruction helpful
Parts Used
-
- Top Burner with Electrode - Medium - 9k
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerDavid from Greenville NC
Gas burner wouldn't light
replaced top burner - in theory simple, but severe rusting of two screws holding the burner required drilling and extracting with a screw extractor. The screws broke requiring that the entire burner pan assembly be taken apart to remove the broken nubs of screws from behind with vice grips. Recommend that you have proper sized pan head screws available when you start job so it can be finished in one sitting. Burner starts perfectly now.
|