Average Repair Rating: 4.5 / 5.0, 4 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The broil element had burnt into,
Remove three strews and two wires. Less than fifteen minutes for this Seventy Seven year old farm boy!
Don from Hazlehurst, GA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broiler coil burned out
removed back plate screw, removed two broiler screws. Disconnected wires in back plate by sliding them off of connectors. removed broiler coil and assembly. Using pliers, bent retaining hooks off of old coil, removed it and replaced it with the new coil. Reversed process.
randall from sheboygan, WI
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
0 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the broiler element burnt out
first I unplugged the stove,took the screws out of the pan that holds the element to the stove, then unplugged the element.then I plugged in the new element, then screwed the screws into the pan that holds the element into the stove. it was very easy.
Deborah from Cumberland, RI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
9 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broiler stopped working.
Indicators showed broiler should be working so basically made a guess that the element was bad and replaced it. Turned off circuit breaker and removed mounting screw and unplugged terminal ends of the element and replaced with new one. Switched circuit breaker on and turned on broiler and my repair was a success.
DAVID from DAYTONA BEACH, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rick
December 12, 2017
The old broiler element is attached to a pan that is screwed to the top of the oven, the new one looks like it doesn't come attached to a pan how is it fastened to the oven?
For model number ART6511LL
Hi Rick, Thank you for the question. The reflector (pan) is sold separate from the element, Part Number: PS1508239.The reflector is discontinued and no longer made. You can reuse the reflector you have now with the new element. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kevin
January 13, 2020
The oven element burned out. This is the second one that has done this over the life of the oven. Not bad. The serial number is: 9808200753 and the manufacturer's part number is: P1130678NWW. The replacement part online shows 3 loops, but I have 2 loops. Can you help me find the correct part?
For model number ARTS6650WW
Hi Kevin,
Thank you for your question. The part number listed under your model number for the broil element is PS11757428. The manufacturer has replaced your previous element with this one and it should still work in your oven. We hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
