2180186-1-S-Whirlpool-W10153532-Rack Adjuster with Wheels- Right Side
2180186-1-S-Whirlpool-W10153532-Rack Adjuster with Wheels- Right Side 2180186-2-S-Whirlpool-W10153532-Rack Adjuster with Wheels- Right Side http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/59559.gif

Rack Adjuster with Wheels- Right Side

PartSelect Number PS2180186

This adjuster connects to the right hand side of the top dishrack. It is used to change the height of the upper rack.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Compare At

    $49.25
  • You Save

    $8.21
  • Your Price

    $41.04
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Rack Adjuster with Wheels - Left Side

Part Number 2180185

This adjuster connects to the left side of the top dishrack. It is used to change the height of the upper rack.

Order within the next 7 hrs and your part ships today!
$41.21
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 46 reviews What's this?
1-5 of 46
 

94 of 94 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsWrench set

CustomerJim from Hendersonville, TN

One of two plastic rollers on this metal part broke (twice)

Remove the entire top dish rack by removing the two front covers on the left and right metal grooved slides. The covers are plastic. No tools are required. After removing the top dish rack, the rack adjuster (with two cheap plastic wheels) is easily removed with an allen wrench. There are six fasteners that must be removed to detach the rack adjuster from the rack.

If only 1 of the 2 cheap plastic wheels on this assembly is broken, do not throw away the old assembly. The functional plastic wheel can be removed and saved for the next time one breaks!!! This cheap plastic wheel cannot be purchased separately from the entire rack adjuster assembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

66 of 75 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

Tools

CustomerJesse from San Jose, CA

Supports for middle rack of dishwasher broke

The middle (plates and silverware) rack of my maytag dishwasher broke. The supports for the wheels were plastic hubs that bore the weight of the rack.

About a year after owning the dishwasher, the front two plastic wheel hubs that support the rack broke.

I ordered the left and right Rack Adjuster Assembly which included the main T shaped support rail including the two wheels. The good news is that these hubs are METAL which should not break like the weak plastic hubs of the previous version.

I removed about 4-5 screws from the original assembly, and installed the new rack adjuster assembly and replaced the screws. About 20 minutes total for both sides.

I also replaced the tracks since mine were somewhat bent after the original supports broke.

Very nice to have a fully operational / sturdy middle rack again on this dishwasher.

Help other customers find the most helpful instructions.

Were these instructions helpful?

14 of 14 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRobert from Middletown, OH

Broken lower rack adjuster

This is a very common problem with this model. However, in addition to this part, you also need the following part numbers (which are not listed for this model):
PS920544 - Lever Adjuster
PS893981 - Cover, Rack Adjuster

The updated RACK ADJUSTER ASSY part did not match up to the other parts in my dishwasher. But, after I found a diagram for another dishwasher model that showed the above two parts as well, I ordered them in hopes that they would work for mine. They worked like a charm, and the design of the new updated part is much better than the original part (which, if you take a look at epinions.com, breaks on just about every machine).

I hope this helps someone out ... I was close to ditching our 1.5 year old dishwasher and buying a new one!

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 10 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:30 - 60 mins

ToolsPliers

CustomerGary from Saint Joseph, MO

Plastic door latch broken

1)Turn off breaker to dishwasher.
2)Remove screws that fasten plastic liner to outer door with allen wrench.
3)Disconnect two wiring connections to latch assembly; this was toughest part of project, had to use pliers to get metal connectors our of sockets.
4)Connected new assembly and screwed door back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 8 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

Tools

CustomerMike from Axtell, TX

Broken wheel on the top pull out rack

First I placed a cutting board under the rack to hold it in place while I took the five screws out of the bracket holding the T shaped bracket in place. I then just switched out the old for the new and guided the bracket into the side mounting piece and placed the end cap back on. Double checked the tightness of the screws and it was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 46