2180186-1-S-Whirlpool-W10153532-Rack Adjuster with Wheels- Right Side
2180186-1-S-Whirlpool-W10153532-Rack Adjuster with Wheels- Right Side 2180186-2-S-Whirlpool-W10153532-Rack Adjuster with Wheels- Right Side

Rack Adjuster with Wheels- Right Side

PartSelect Number PS2180186

This adjuster connects to the right hand side of the top dishrack. It is used to change the height of the upper rack.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Not cleaning properly.
  • Compare At

    $48.28
  • You Save

    $8.05
  • Your Price

    $40.23
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Rack Adjuster with Wheels - Left Side

Part Number 2180185

This adjuster connects to the left side of the top dishrack. It is used to change the height of the upper rack.

$40.39
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 46 reviews What's this?
 

4 of 13 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customeraudrey from roscoe IL

New range handle

was a 15 minute job

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerLarry from Solon IA

Upper rack wheel was broken

Four screws were removed and new parts were installed. The only problem was that two types of rack adjusters exist. If your dishwasher does not have a lever, part number PS2100470, then the new rack adjuster either left or right side will not work without part numbers PS2100470(lever) and PS2100308(cover). Be sure to order parts for both sides since the original plastic wheel supports have been replaced with steel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRobin from Champlin MN

Broken wheel on adjuster

It was so easy to install this part. I did have to buy a star screwdriver because I only had a flathead and a Phillips head, but I just took the part to the hardware store to make sure I bought the right driver. Once I had the right tool, installation tool less than 10 minutes. It was just a matter of removing the old part and putting on the new part -- 6 screws and your done. Very happy with this part.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerMarilyn from Marietta GA

Both side broke due to original plastic parts not being able to hold weight

Since I didn't have a star screw driver and my handyman was there making other repairs, had him install. I could have taken the part to Home Depot so they could sell me the right screw driver, but this worked out fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerKevin from Hillsborough NJ

The wheel broke off of the right side front for the upper rack

I ordered the part which came very quickly. I undid the stops on the slide bar and removed the upper rack, used the star bit screwdriver to remove the 5 screws and replaced it quickly. very easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerKenneth from Lake Orion MI

Wheels broke off rack

I removed screws from rack adjuster, installed new adjuster, and replaced screws (required torx driver).

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerScott from Kane PA

Wheel broken on top rack

Read some of the other stories first. It was very easy to take the top rack off. Once the rack was off, I simply removed some screws, removed the adjuster and replaced with the new one. Overall a very easy fix. I'd most definitely use this site again for both parts ordering and replacement advice.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDavid G from Coon Rapids MN

Plastic axle broke for pull out rack

Removed old part with screw driver and replaced with new. New parts were metal axle. Ordered on line.
Phoned to confirm a question. Parts arrived Tuesday

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerDAVID from LEXINGTON IL

Broken rollers on the top rack

repair was fairly simple, I removed 6-8 screws and replaced the adjuster assembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerLannie from Mountain Green UT

Broken roller

I simply unscrewed the broken rack adjuster assembly from the rack and installed the new rack adjuster.
Pay attention to the position of the thumb lever when you remove the old adjuster for ease of re-assembly.
That's it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerMark from Palm Beach Gardens FL

Rack adjuster for top shelf broken

Part came in record time.

Repair was intuitive, just a few screws (Torx style). New part fit perfectly. Up and running in less than 1/2 hour.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBrian from Huntersville NC

Broken wheels on both sides of maytag top rack

The repair is very simple: using a torx/star driver, I removed the 5 screws holding the original rack adjuster in place. Taking the 2 plastic pieces apart, I removed the old adjuster with the broken wheel and inserted the new adjuster wrapping them back around the rack side as before. NOTE: Once apart, I had no issues with the adjuster tab popping out, but others might. Just know that it's pretty self evident where and how it goes back in. (It pops back in very easily). I used the original screws and tightened things up once again, inserting the rack back into the dishwasher track and replacing the stop tabs at the ends of the slider bars. Took all of about 10 or 15 minutes - and only that long because I chose to wash and clean the insides of the rack adjusters to remove some (what I guess was) food pieces that were lodged in there.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerharriet from yonkers NY

Rack wheel broke thus the top rack slips off the track if it is pulled out for loading. Ck

we unscrewed one side and removed the rack adjuster. we replaced the wheels and screwed in the side. it works perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerBobby from Jefferson City TN

Replaced dish rack holder

Pulled dish rack. Removed old rack holder and replaced with new one,and put dish rack back in dishwasher. Then the only thing to do is adjust height of the dish tray.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels- Right Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerChristy from Woodbridge VA

Adjuster...right side

I removed screws from the old part, took it out and replaced it with the new part. Simple! I was frustrated because I couldn't find the part I needed and all the businesses I called told me I would need to replace the whole top rack, which I thought was silly since the only thing that broke was the plastic support/wheel. I figured out what part I needed by reading repair stories from other PartSelect customers...looked at the diagrams, ordered the part, replaced it, and voilia! all is well!

Help other customers find the most helpful instructions.

Were these instructions helpful?