2180185-1-S-Whirlpool-W10153530-Rack Adjuster with Wheels - Left Side
2180185-1-S-Whirlpool-W10153530-Rack Adjuster with Wheels - Left Side 2180185-2-S-Whirlpool-W10153530-Rack Adjuster with Wheels - Left Side http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/59559.gif

Rack Adjuster with Wheels - Left Side

PartSelect Number PS2180185

This adjuster connects to the left side of the top dishrack. It is used to change the height of the upper rack.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $49.45
  • You Save

    $8.24
  • Your Price

    $41.21
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Rack Adjuster with Wheels- Right Side

Part Number 2180186

This adjuster connects to the right hand side of the top dishrack. It is used to change the height of the upper rack.

$41.04
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 44 reviews What's this?
 

5 of 6 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels - Left Side

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMelvin from Rochester Hills, MI

A wheel on the upper tray that moves in the slide broke.

Actual repair took less than 5 minutes. Removed 5 screws from original "adjuster' and removed the outside housing. Aligned the replacement part and simply replaced the five screws. Wheels on the replacement part are held in place with steel "rivets" while original wheels are all plastic and held in place with a screw . The replacement part is a much sturdier set-up. I saved the unbroken wheel from the original adjuster in the event a wheel on the right hand adjuster breaks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerLuAnn from Glendora, CA

Axle on wheel holding top rack broke

Hardest task was finding model number on my ancient dishwasher. Finally just looked at photos and picked the right one. Ordered part and it was here in 24 hours (How do they do that?!!) and it still cost less than at local appliance shop. Carefully kept old screws so I could use them on new adjuster. Part doesn't come with new screws, so watch what you do when you take old one apart. Needed a star screwdriver which I had from a previous repair when I was trying to replace just axle without buying whole new adjuster. Easy enough to do but need a third hand to hold up rack while attaching adjuster.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerCarol from Laveen, AZ

The "rollers" on the adjuster were broken and it was hard to keep the rack on the track.

I removed the middle rack from the dishwasher being careful to pay attention to how the end stops were located. I put the rack on the kitchen table and with my new parts placed where I could reach them, simply unscrewed the faulty parts and replaced them with the new parts! Couldn't have been easier. I especially appreciated the ease of navigating your web site and locating the parts I needed. I was looking for something entirely different until I read feedback from a previous customer and knew instantly what part I needed!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 3 people found this instruction helpful

Parts Used

  • Rack Adjuster with Wheels - Left Side
  • Grate Foot

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsWrench set

CustomerGina from Atlanta, GA

Upper left rack roller broke, had to replace rack adjuster assembly

First I had to take out the end caps on both sides of the upper rack - easy enough - you push in the direction of the arrows and they open up and come off. Then I took the rack off. Using the smallest allen wrench I could find in my ex-husband's set that he left behind (yay!), unscrewed the old rack assembly. The (blue) adjuster level doohickey popped out when the old assembly came off, but it was easy enough to fit that back in properly by looking at the right-hand one that was still in place. All I had to do was fit the new rack assembly into place, put back a few screws, and slide the rack back into place. Put the end caps back on and you're done. Maytag should offer free replacements for this part, IMO- the wheels are too flimsy to begin with, our dishwasher is only four years old, and the new part is pricey, at $29.45 a pop.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerJames Jr. from Laguna Hills, CA

Broken wheel on rack adjuster and broken tine pivot

The diagrams on the web-site were very useful. Slid the entire upper rack out, by removing he snap-in slide stops on both sides. Unscrewed the cover to the upper rack adjuster on the side with the broken wheel. Replaced the new rack adjuster and discarded the broken one. Washed the food residue from the cover to the upper rack adjuster. Placed to old cover onto the new rack adjuster. Replaced the upper rack on the slide tracks. Replaced both snap-in slide stops on the slide tracks. Removed the broken fold away tine pivot. Replaced the new fold away tine pivot.
Saved the second unneeded tine pivot for future use.

Help other customers find the most helpful instructions.

Were these instructions helpful?