Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Bob K - April 13, 2022
Verified Purchase
Worked perfect easy to install
The part came quick easy to install great product
★★★★★
★★★★★
Douglas G - September 1, 2020
Verified Purchase
rack adjuster
showed up as promised, easy to install. dish washer working again properly.(note) only needed a wheel [2-bucks] off the new part but had to buy the whole rack adjuster [60.00 bucks]. so i put the whole new part in.
★★★★★
★★★★★
Michael G - February 14, 2019
Verified Purchase
Exactly as expected.
Exactly what I needed to get going again!
★★★★★
★★★★★
Frank C - December 18, 2018
Verified Purchase
Easy and right
I’ve used past select in the past and their always helpful and make sure you get the part you need !!
★★★★★
★★★★★
Paul R - October 4, 2018
Verified Purchase
Wrong style part!
Turns out the manufacturer has modified this part many times and it was completely incompatible with my washer! Refund was handled quickly and efficiently. Thank you.
★★★★★
★★★★★
Bev Beal L - September 11, 2018
Verified Purchase
No need to replace an entire dishwasher
I was very happy to replace this part and not an entire dishwasher
★★★★★
★★★★★
Mary C - July 30, 2018
Verified Purchase
Easy Repair
I needed to replace a rack adjuster with the wheels for my Maytag dishwasher. Found just what I wanted at PartSelect and ordered it. It came quickly and was easy to install. No problems!
★★★★★
★★★★★
Linda B - May 24, 2018
Verified Purchase
Easy fix.
The replacement part is great. No problem with the install and upper rack rolls out like new.
★★★★★
★★★★★
Gary O - February 15, 2018
Verified Purchase
Dishwasher
fits and works just fine. Now I don't have to buy a new dishwasher.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 45 reviews.
What's this?
Sort by:
< Prev
1
2
3
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Wheel broken
Removed the 2 wheel stops and slide the tray out. Removed 5 screws and removed the part, installed the new part and reinstalled the 5 screws. Reinstalled the tray and installed the wheel stop. Done...
Stephen from STERLING, MA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One rack adjuster failed and the tine piviots wore out due to age.
I had changed a rack adjuster several years ago but decided to take a look at your videos before starting the repair. I watched both videos and then did exactly as suggested. The repair went very quickly and was extremely easy.
Small roller broke on the top rack. Had to buy the whole upper rack lifter adjustment assembly.
Thanks to the good online instructions it went very smoothly. Took rack out of dishwasher, removed 5 screws and took rack lifter assembly apart. Fit new assembly piece on and replaced 5 screws. Put rack back in dishwasher.
Linda from Rexville, NY
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken wheels on both sides of Maytag top rack
The repair is very simple: using a torx/star driver, I removed the 5 screws holding the original rack adjuster in place. Taking the 2 plastic pieces apart, I removed the old adjuster with the broken wheel and inserted the new adjuster wrapping them back around the rack side as before. NOTE: Once apart, I had no issues with the adjuster t
... Read moreab popping out, but others might. Just know that it's pretty self evident where and how it goes back in. (It pops back in very easily). I used the original screws and tightened things up once again, inserting the rack back into the dishwasher track and replacing the stop tabs at the ends of the slider bars. Took all of about 10 or 15 minutes - and only that long because I chose to wash and clean the insides of the rack adjusters to remove some (what I guess was) food pieces that were lodged in there.
Followed the online video instructions. Super easy.
Patricia from Springfield, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken wheel on rack adjuster and broken tine pivot
The diagrams on the web-site were very useful. Slid the entire upper rack out, by removing he snap-in slide stops on both sides. Unscrewed the cover to the upper rack adjuster on the side with the broken wheel. Replaced the new rack adjuster and discarded the broken one. Washed the food residue from the cover to the upper rack adjuster. P
... Read morelaced to old cover onto the new rack adjuster. Replaced the upper rack on the slide tracks. Replaced both snap-in slide stops on the slide tracks. Removed the broken fold away tine pivot. Replaced the new fold away tine pivot. Saved the second unneeded tine pivot for future use.
left side place wheel and housing of middle rack broke
checked video and comments of previous customers. Had to buy torque wrench so although we have lots of tools we did not have this type of wrench. No indication of it needed when we ordered part, no written instructions with part. What do people do who are not able to have a video accessible to them as they install? Without video we woul
... Read mored have had much more difficulty.
Had tried to order replacement wheel...seems odd that since it is reported that the wheels (plastic) have frequent breakage issues that you cannot just replace it instead of a $50 larger part. It is hard to find repair people in our rural area so glad to have online access. Good service from this company, prompt arrival etc.
Read less
Kathryn from Chestertown, MD
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken wheel in top rack slider
incredibly easy - unscrew 5 screws, pop off cover, remove old assembly, attach new one, re-screw cover
Richard from Boerne, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
8 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
February 4, 2019
Can you just buy the wheels on the rack adjuster
For model number Mdn6601aws
Hello David, Thank you for writing. I do apologize however the wheels are a part of the adjuster assembly and not available on their own. Hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Gregory
December 6, 2019
I have a broken front wheel on the upper left rack. May i purchase the wheel only? Can you please verify the part number? Thanks.
For model number mdbh970aws
Hello Gregory, thank you for writing. This Rack Adjuster with Wheels - Left Side, part number PS11749126 is the replacement part you will need for your model. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Andres
October 20, 2017
The plastic wheels on the actual rack that fit into the sliding assembly broke off the actual rack; so i believe i need to replace the whole 'adjuster' assembly (left and right) - what kind of screwdriver/wrench do i need? It appears to be some kind of a six-sided bolt. Thank you!
For model number MDB7600AWW
Hi Andres,
Thank you for your inquiry. There is a video listed with the part on our website that shows how to install the rack adjuster and the gentleman in the video explains what tools you will need to do the install. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dom
April 10, 2018
Top rack is not hanging properly. The front of the rack drops.
For model number MDB8859AWS2
Hi Dom, Thank you for the question. I suggest checking the rack adjusters, Part Number: PS11731549 and Part Number: PS11749126 for damage or wear. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dom
April 10, 2018
Looking at part # wpw10153530. It is described as left side. My sweet has adjusters on both sides of the top rack and it is the right side that is broken. Is this part interchangeable?
For model number MDB8859AWS2
Hi Dom, Thank you for the question. The right side adjuster is PartSelect Number: PS11731549. Hope this helps!
Was this helpful?
Thank you for voting!
Ronald
February 2, 2022
Will the rack adjuster with wheels fit my dishwasher MDB8600AWB
For model number MDB8600AWB
Hello Ronald, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11747718 for the Upper Wheel Assembly for the Upper Rack. This model does not have a Rack Adjuster. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
When I'm looking at the dishwasher the wheel on the right side rack adjustor is broken off. Is there a replacement part for this model?
For model number MDB7600AWB
Hi Renee,
Thank you for your question. The part number listed under your model number for the right-side rack adjuster is PS11749127. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
