2180183-1-S-Whirlpool-W10153528-Adjuster - Left Side
2180183-1-S-Whirlpool-W10153528-Adjuster - Left Side 2180183-2-S-Whirlpool-W10153528-Adjuster - Left Side 2180183-3-S-Whirlpool-W10153528-Adjuster - Left Side

Adjuster - Left Side

PartSelect Number PS2180183

This adjuster connects to the left side of the top dishrack. It is used to change the height of the upper rack.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $52.06
  • You Save

    $8.68
  • Your Price

    $43.38
In Stock
Order within the next 11 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Adjuster - Right Side

Part Number 2180184

This adjuster connects to the right hand side of the top dishrack. It is used to change the height of the upper rack.

Order within the next 11 hrs and your part ships today!
$42.07
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 5 reviews What's this?
1-5 of 5
 

4 of 4 people found this instruction helpful

Parts Used

  • Adjuster - Left Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerCamille from Mill Creek WA

Broken wheel in upper rack

I removed the old rack adjuster by unscrewing four screws. I put the new rack adjuster in place, carefully fitted the adjustment parts together, then replaced the four screws. The best part of the repair was that Parts Select had originally indicated that my part would be on back order for a few weeks, but I actually received the part within just a few days. What a nice surprise - thanks!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Adjuster - Left Side

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerYvon from Baltimore MD

Rollers on adjuster were loose because plastic was broken inside where screws were attached

remomed old adjuster and attached the new one to the housing and it was done it was very simple

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

  • Adjuster - Left Side

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

Customerkevin from little river SC

Broken wheel on rack

I had to remove rack, remove old assembly and replace with new part. The manufacturer has improved the replacement part, which leads me to believe I am not alone. I used a nut driver/ allen wrech to remove broken part and took about 10-15 mins to repair. Part arrived very fast, great service!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Adjuster - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerKenneth from Kansas City KS

Tray glide wheel broke off

The original part was plastic. I kind of expected a $5 replacement part and not a preassembled unit. It was okay because the redesigned rack adjuster assembly was steel and will probably last forever. Worth the $40.

Shipped part arrived in 2 days. Pulled off 2 retainer clips, pulled out the rack, unscrewed 5 or 6 screws, used original adjuster, and had it all back together in about 10 minutes. Oops, I forgot to read the instructions, again.

Thanks for the fast service.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Adjuster - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerPeter from Redondo Beach CA

Wheel broken in rack adjuster/slider assy.

remove several Torx-bit screws in upper assy, swap out the broken assy. for the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 5