2180152-1-S-Whirlpool-W10135090-Electronic Control Board
2180152-1-S-Whirlpool-W10135090-Electronic Control Board 2180152-2-S-Whirlpool-W10135090-Electronic Control Board 2180152-3-S-Whirlpool-W10135090-Electronic Control Board http://www.partselect.com/Schematics/Whirlpool/LLWQ0TZT.gif

Electronic Control Board

PartSelect Number PS2180152

This board controls the operation of the unit.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Light not working.
  • Fridge too warm.
  • Will Not Start.
  • Clicking sound.
  • Compare At

    $376.78
  • You Save

    $62.80
  • Your Price

    $313.98
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.6 / 5.0, 27 reviews What's this?
1-5 of 27
 

88 of 91 people found this instruction helpful

Parts Used:
  • Electronic Control Board
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers, Socket set
Customer: Margaret from San diego, CA

Controller board replacement

The refrigerator light went out and a bulb replacement did not correct. Also the temperature indicators were not on. There was a clicking noise each time the door was opened, coming from the back lower corner of the refrigerator. The repair man said it would be $500+ to fix! We found the board on this website. Consult the manual for where this is located, but on my model it was on the refrigerator side, in the back on the floor level. In a white plastic box the size of the board +. It is located on the lower left on the side of the cabinet. Unplug the refrigerator from the wall, remove the back cardboard cover. Remove the box, and the board comes out, open the box, inside there are 3 connections and a holding clip. Replace the board and put it back in. The put the box back in to the refrigerator. We kept the old one for a couple of days because the components had been changed since our refrigerator was made, but it functions exactly the same. Piece of cake! Saved $400!

Help other customers find the most helpful instructions.

Were these instructions helpful?

38 of 43 people found this instruction helpful

Parts Used:
  • Electronic Control Board
Level of Difficulty: A Bit Difficult
Time to do repair: 1- 2 hours
Tools: Nutdriver, Socket set
Customer: Harry from Tallmadge, OH

The lights in the refrigerator section flickering.

The lights in the refrigerator were flickering when the door wass opened and a chattering noise was coming from the refrigerator.
Traced the noise back to the Electronic control Board. Removed the ECB and inspected it. The solder at the back of the board was burnt in one place.
Ordered a new ECB. The three connectors on the board were identical to the old board, but the board had different components to my old board. The components match was about 60%.
I still installed the new board. I have been monitoring it for two days, all is working well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

26 of 28 people found this instruction helpful

Parts Used:
  • Electronic Control Board
Level of Difficulty: A Bit Difficult
Time to do repair: More than 2 hours
Tools: Nutdriver, Screw drivers
Customer: Michael from Riverview, FL

Fridge was not cold and freezer was way to cold and defroster was not running...

I possibly could have done the entire repair with the last part used but who knows...Anyways the fridge was not getting cold and the passage that blows cold air from the freezer was clogging with ice as was the cold air intake spot at the bottom of the freezer coils...this problem behan 3 months ago...I replaced the thermostat first...didnt work...second, a new burner element....also did not work and finally what worked was a new control board at the back of the fridge...also the lights in the fridge went out 3 years ago and now they are back on after the new board was installed...hope this saves someone else some time and frustration.

Help other customers find the most helpful instructions.

Were these instructions helpful?

24 of 26 people found this instruction helpful

Parts Used:
  • Electronic Control Board
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Kenneth from Pinson, AL

The interior lighting nor the temperature setting display would work when the refrigerator door was opened.

First, I unplugged the refrigerator. Then, I removed the cardboard cover from the rear of the fridge, using a 1/4" nut driver, removed the white plastic box on the rear left side (this box houses the control board), using the same 1/4" nut driver. I then replaced the control board, using no tools, plugged the fridge back in and checked operation. All ok and working great!! By the way, while the old control board is out of the way, this is the perfect time to vacuum out all of that dust, lint, etc. that will be found on the black condenser coil, located just behind the compressor and control board. This coil extends from the rear to the front of the refrigerator. The front section of the coil can be accessed by removing the white front panel just above the floor. Again, no tools needed. Easy from beginning to end!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

15 of 18 people found this instruction helpful

Parts Used:
  • Electronic Control Board
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Tom from N Ft Myers, FL

Refrigerator light out, digital display out

Local appliance repair wanted $450 !
I bought the control board for $87, pulled the fridge out, removed cardboard cover at lower back of fridge. There was a white plastic box with 3 electrical bundles leading in to it. Used the nutdriver to remove 2 nuts to remove plastic box, open box, disconnect 3 different electric bundles from old control panel and then snapped them in to new control panel. Reinstall box. Done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 27