| |
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerTrung from Boyds MD
Light, digital display, and fridge not cold
Light and digital display were not working for months. Then recently the freeze would ice up and no circulation to fridge side. Researched net and saw others will similar issues. Replaced electronic control board on back of fridge (per instructions and pictures from another poster). Unscrewed a few screws and was able to easily replaced board. Pride of getting work done, low costs, and easy fix made this a very good experience.
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
CustomerClark E. from Trussville AL
Light went out in refrigerator side and clicking noise was noticed
Pulled refrigerator from wall , removed cardboard cover over motor & condenser, removed plastic box from refrig frame, by removing two screws,umplugged three sets of wires from board & removed the electronic control board. Replaced by reversing the above.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsSocket set
CustomerLarry from Huntsville TX
The light was out on refrigerator side,a p on refrigerator control and no cooling on freezer or refrigerator side.
I called the service man to see what it would cost to repair the refrigerator. He said the board was $230.00 plus service call. I said I could buy the board for less than $100.00. He could not believe it. I got on line and showed him the cost of the board. I told him I would fix it myself. He said go for it. I removed the cardboard cover on the back-bottom of refrigerator. Removed two screws that hold the white plastic box on left hand side of refrigerator. Remove box, take off cover and remove the three wiring plugs. Removed old board and replaced with new board. Reinstalled wiring plugs, cover and mount the box back on the frig and you are good to go.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers, Socket set
CustomerLeon from Boca Raton FL
Fridge lights went out and the fridge stopped working
removed back panel and on right side opened the control board assy. removed cable from board and replaced with new control board. changed the fridge door switch and pluged the electric cord back in the wall. Fridge working fine.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerPeter from North Pallm Beach FL
Bad control board
I diagnosed the problem easily because my refrigerator lights would not come on when the door was opened and the control LEDs (temp setting for freezer and refrigerator side) were not lighted. It was as easy as ordering the part (it arrived in a couple of days), moving the refrigerator out from the wall, removing 6 or 7 quarter inch hex head screws (this was the only part that needed a tool), opening a plastic box, taking out the board (it is just snapped in place) removing 3 or 4 wire plugs (don't worry about confusing them, they are keyed and all are different from each other), then reversing the process. The whole thing took about 10 minutes. The hardest part was cleaning up the dust and dirt that had built up behind and under the appliance itself. It was a piece of cake. I figure I save over a $150!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsPliers, Wrench(Adjustable)
CustomerNancy from Danville VA
My light went out
When the light of my refrigrator went out..I researched the web and found why it did, then I found Parts Select.com and they had the part I needed to fix my problem..and it worked, we saved over $400 dollars by buying this part and I thank you for being there for us.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerLARRY from MEANS KY
Light was not working control side
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerWilliam from Lusby MD
No light on refrig side.
Pull out refrig to access lower rear area. Remove the cardboard cover (5 or 6 hex screws). White box on lower left (facing rear of box) holds the Electronic control board. Three plugs on the board and re assemble. Don't forget to vacuum the coils accessed from the front grill.
The hardest part of this repair was for me to be convinced that a simple light circuit would be controlled by a circuit board.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerWilliam from Quakertown PA
The refrigerator light would flicker and there would be buzzing noise under the fridge.
Take the bottom panel off the back of the refrigerator.there's a white box on the left side.take the 2 screws out and open the box. replace the board and reinstall the box.you should unplug the fridge before you start.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
Customerpaul from acworth GA
Light flickering/clicking noise
1) Identified source of noise by listening carefully to area at back of refrigerator
2) Removed cardboard panel using nut driver
3) Unplug fridge!
4) Remove two screws holding white plastic box on back left side
5) Open box and remove circuit board and remove wire harness
6) Reverse process-you should ensure you remove any static from your body by touching metal first
7) Replace panels
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerDaniel from Casselberry FL
Whirlpool refidgerator, inside light flickering and having an arcing sound behind refridgerator
removed the cardboard protecting compressor and fan in the back of refridge, arcing sound came from small plastic enclosure protecting mother board for the refridgerator, opened plasic cover door was opened the arcing noise came from the mother board. Looked up part on the parts select parts page for my model ordered, part came the next day removed power and replaced lights now work. Thank goodness for the inventory of parts select as it was in stock and I will use them for all my appliance parts in the future
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerRussell from Trussville AL
The lights on the refridgerato side were out there was a clicking noise coming from the back of the unit
The repair wassimple. Just remove he back of the unit witha num driver. On the left side is a white box. Unlatch the box and the board is rght there. Un plug the unit and the three cnnections to the board. there is a plstic tab holding itin place. Swap the boards and plug the connectors back in and you are done.
|