BBB A-Plus

Handle and Latch Assembly with Switches

PartSelect Number PS2180050

This part includes the black handle, the latch and the door switches as a complete assembly.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failed
In Stock

  • Compare At

    $34.48

  • You Save

    $5.75

  • Your Price

    $28.73
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 2 3 4 NEXT > 31-45 of 57

 

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerconnie from sebring FL

Door latch broken

Ordered door latch assembly tuned off breaker pried door open as it was closed.. took 10 screws out of door ,unplugged 2 plugs popped nrw part in put screws back...fixed easy job...took about 10 minutes saved at least $100 dollars part was delivered in 2 days. The hardest part was getting the door open to fix it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerAnthony from TERRYVILLE CT

Handle didn' t lock so washer wouldn't run

I took the plastic part of the door off and then I took the handle unit off by pulling off two wire connection hooked up the wire connections just by pushing them together screw the unit to the door put the plastic part back and it was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerJacob from Lowell AR

The latch broke, and you couldn't open the dishwasher.

First - I selected 2-3 day delivery after ordering the part late afternoon. The part arrived the next day. Very satisfied with the time it took and the ease in selecting the correct part. Once I got the dishwasher door open, I removed the 11 screws from the door panel. The top two screws also hold the latch asssembly in place, so I removed those last. Then I detached the wiring, which required a pair of plyers - they were very tight. After that, I was able to replace the new part, screw the panel back on, and load the dishwasher for my wife before she got off the phone with my mother-in-law. Brownie points were awarded, and it took about 15 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerCHRISTIAN from Philadelphia PA

Broken handle latch

remove all the screws along inside of the door. seperate the inner and outer door. remove the electric terminals. pull out old door latch. put electric terminals on new part. reattached. replace inner door and screw back down.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerRobert from New Paris PA

Latch stuck and then would not lock shut

Removed inner panel on the door, went online and determined the part I needed and ordered the part on Thursday evening, part was shipped on Friday, received the part and installed on Saturday. Very pleased.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRizwan from Sandy UT

Door latch was faulty and would not work, had to use a lot force to open if closed accidentaly

As described it was as easy as 1-2-3, safety first, disconnect the power, unscrewed 8 screws, opened the cover, got the old broken handle out and installed the new latch handle- connect the 2 connections, turned the main disconnect and walla.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerFu-Min from Tallmadge OH

Door handle broke

1. Open the dishwasher door. Remove the inside panel of the dishwasher door and expose the Handle and Latch assembly.
2. Order "Handle & Latch Assembly Complete with Switches" from partselect.com
3. Received the part 3 days later.
4. Replace the part.
5. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerWilliam from Albuquerque NM

Broken latch, could not open without pulling dw almost out of the cabinet.

Removed torx head screws around inside of door. This allows you to open the top of the door enough to access and remove the latch. The latch itself is not fastened to anything, just held in by pressure of the door panels. The wires on my latch were extremely difficult to remove and if you're not careful you will get a shock, so don't touch them both at the same time. Put in new latch, re-install screws. Worked perfectly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerDennis from Hansville WA

Latch was broken

This was so easy. Just loaded up a torx bit in my drill, unscrewed the 8-10 screws on the door and lowered the front. Latch assembly literally fell out. Screwed up my courage and took a pair of pliers to the electrical connections, pulled them off and hooked them up to new unit one at a time (I confuse easily thus ending source of confusion) and set latch in it's place. Replaced the door front screws and was done. Piece of cake and the directions on your site were very helpful.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGary from Carmichael CA

Plastic latch handle broken/hard to open door

Opened dishwasher door (all the way down) removed all the screws around inside of door/ lift up back of door, removed handle assembly, used a sharpie marker to mark were wire connectors go back to, then used screw driver to pop off wire connectors.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Screw drivers

CustomerEdward from Rockton IL

Broken door handle

unscrew door and replace door handle.
5 to 10 minute job

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerEric from Redwood City CA

Broken handle

removed inside panel disconnected switch replaced with new handle and switches.

Works great

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerHyrum A from Venice UT

The latch was broke

easy to do unscrewed the plastic on the inside of the door lifted it out of the way takeing care not to damage the wires that are connected to it for the soap dispenser. the old latch fell right out the 4 wires where a bugger to get off and i actually destroyed the switches while unhooking the wires i plugged the wires into the next latch that came with new switches put everything back together and i open and closes like brand new

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerRichard from Angelica NY

Broken latch handle

Removed the inside door panel. Removed old, broken latch. Disconnected the two wire plugs. Connected the wire plugs to the new latch. Installed new latch into door. Replaced inside door panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerDONALD from BROOKFIELD WI

Door would not open.

To open "stuck door", with right hand around upper right top edge of door and with left hand push directly inward on handle then pull out with right hand. It is a little tricky to do, but door will open. Turn off power to dishwasher. With the right size torx driver, remove the stainless steel screws around inside perimeter of door, left, right and top. Lift out inner door, which has a clip holding some wire in middle, so can;t lift all the way off. Lift it up enough to just "lift out" door handle/switch assembly. With power OFF, grab plug connectors and pull of old handle. Mine were very tight, and kind of rocked connector down and up while pulling and came right off. Plug wires into new unit, lay in place of unit removed just alighning to two pins. Lay inner door back in place, put screws back in, and you are done. VERY easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 2 3 4 NEXT > 31-45 of 57