2180048-1-S-Whirlpool-W10130696-Door Handle and Latch Assembly with Switches
2180048-1-S-Whirlpool-W10130696-Door Handle and Latch Assembly with Switches 2180048-2-S-Whirlpool-W10130696-Door Handle and Latch Assembly with Switches 2180048-3-S-Whirlpool-W10130696-Door Handle and Latch Assembly with Switches http://www.partselect.com/Schematics/Maytag/54089.gif

Door Handle and Latch Assembly with Switches

PartSelect Number PS2180048

This bisque door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. Please NOTE: The bisque handle is no longer available separately. Only available with this assembly.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failure.
  • Door won’t close.
  • Will Not Start.
  • Compare At

    $35.45
  • You Save

    $5.91
  • Your Price

    $29.54
In Stock
Order within the next 7 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 88 reviews What's this?
 

2 of 2 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Henry from Punta Gorda,, FL

Door latch assembly broke

Remove all the screws around the inside panel and separated by size and location. There are two larger screws for the bottom two holes. Marked the electrical connectors for location on the latch assembly. Also marked the top of the two microswitchs for easier reattachment. Removed the microswitchs with the needle-nose pliers and attached to the new assembley. Reattached electrical connectors and the plastic panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Vic from Grand Ledge, MI

Broken latch handle

Removed 10 torx head screws from around perimeter of door (two of these screws hold door latch and handle). Unplug two wires from handle assembly and replace old handle with new. Reinstall 10 perimeter screws and job is complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: jerry from chicopee, MA

Door latch was broken and wouldn't close properly.

I removed about 10 screws on the back of the door and the latch came out with the assembly.I then took a pair of pliers to remve the wires from the prongs on the back of the latch.The wires were a little hard to remove because of the age of the dishwasher.The new latch went right on in less than a minute.Relaced the screws and turned the dishwasher on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Brian from Wyckoff, NJ

Door would not close

Shut off power at circuit breaker unscrew door liner remove old handle install new handle replace door liner turn on power very easy less than 15 minutes total.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Bradley from Randolph, NY

Broken door handle

remove screws on inside of cover,lift and remove two screws holding handle, unplug wire connection and reverse to install.

Help other customers find the most helpful instructions.

Were these instructions helpful?