Door Handle and Latch Assembly with Switches

PartSelect Number PS2180048

This bisque door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. Please NOTE: The bisque handle is no longer available separately. Only available with this assembly.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failed.
  • Door won’t close.
  • Will not start.
  • Compare At

    $32.77
  • You Save

    $5.46
  • Your Price

    $27.31
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 88 reviews What's this?
76-88 of 88
 

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMargaret from Buckley IL

Plasti door hand fell off and fell inside the door

Took the inside cover off the door and replaced the handle. This probably saved us $100 by the time we would have paid for a service call from a repair man.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

Tools

CustomerWayne from Homewood IL

Door latch broken in two pieces

A ratching screwdriver with a torx bit makes the repair job relatively easy. The most difficult part of the whole repair was to try and separate the wire connectors from the two latch switches. I gave up and just transferred the old switches with wire connectors attached to the new latch assembly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerElisabeth from Harlingen TX

Replace handle

took necessary steps to remove handle that needed to be replaced. screws that needed to be removed. placed new part in and connected the necessary wires.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerSam from Omaha NE

Dishwasher handle was broken

Although I might have been able to replace just a single peice to effect this repair, I chose to replace the entire door latch assembly. Just took off about a dozen torx screws from the inside of the door which then revealed the latch assembly. Simply remove two electrical cnxns off the old latch, replace onto the new latch, replace the dozen screws and you're done. Talk about saving money. Oh, these guys had the part to me in less than 48 hours wiith no extra shipping charge and their schematics on the web site made it easy to determine what I needed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJim from Paducah KY

Pastic door latch broke

I open the door and removed 11 scews. I than removed the inside of the door to access the latch. I pulled the two wire clips and remove the latch. Place the new latch in the slots and pushed the wire clips back on. I than replaced the back panel and drove the screws back in.

The funny thing is at first I called a local appiance dealer here in town to get the part. After two weeks of waiting and no return call. I notified them to forget the order. I went on line and found this web site. Within three days I had my part at a better price than I was qouted by the appliance store.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerCort from Livermore CA

This brand of maytag certainly doesn’t live up to it’s brand name

So the door failed one fine evening and blew water and the door open. Come to find out the latching mechanism had failed due to stress cracks. The last sterilization cycle seems to do the failed part in totally to the point if failed on the next wash cycle.

So 12 screws later and a new door latch assembly I have a working Maytag once again.

Steps are:

1.Unplug dishwasher of AC supply

2.Lower front door 45 degrees down.

3.Remove 5 screws on the top of door assembly

4.Remove next lower 4 screws mid door assembly. Leaving the lowest screws in place.

5.Separate front door assembly from inter shell of door.

6.Grab door latch assembly and disconnect one switch at a time. Replace one switch connector at a time to the new latch assembly.

7.You must keep in mind that the switches have a locking connector so use a very fine screw driver to disengage the lock in the center of the plug.

8.Once you have swaped out of old latch reassemble in reverse order.

And your done! ?

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerTheodore from Puyallup WA

Broken handle

Removed inside face of door and took out old but had a little trouble with wires. Used pliers to remove old wires and replace with new wires.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerGlenda from Weirton WV

Dishwasher/oven

magtag dishwasher handle/door latch was easy and took less than 30 min. was disappointed that the assembly was plastic it was only 5 yrs old. The oven repair was a bit more difficult a lot of parts to come apart to get to the gasket

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerOwen from No. Easton MA

Handle and door latch complete assembly with switches

I have had this machine about four years and this is the second time I have had to replace the door latch. I unscrewed all but the bottom two screws on the inside of the door and leaned the piece outward in order to remove and replace the latch. It is pretty simple to replace

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRichard from Damascus OR

Broken door latch

grabbed a chair & sat in front of dishwaser, removed all screws (11) on inside of door, latch held on by two most center screws, lift inner panel away from door outer a few inches, with pliers carefully slide off siamese spade terminals from latch assy. ( note wire color positions) install wires on new latch & reassemble inner & outer door panels (parts needed as per on line was somewhat confusing as noted in other contributors descriptions, I ordered Pn 2180048 & it was the correct part, PartSelect is a great resource including the customer feed back, wish there were more sources out there like them, will buy from them in future as needed

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerClifford from Midlothian VA

Handle broke when opening the dishwasher (should have been a maytag recall)

With the correct torx bit, I was able to unscrew the fasteners on the inside of the dishwasher door. The handle assemble required unpluging two electrical terminals (flipped breaker switch for safety that had the dishwasher on it's circuit). To disconnect the terminals, I used a flat head screw driver to this. By placing the screw driver blade between the old assy switch and the terminal blade and then rotating the srew driver blade, the terminal blade slid out of the old assy electrical connector. Two of the screws holding the door, also held the latch assy. I switched the broken assy with the good assy, replaced the electrical wires, then replaced the screws in the door & reset the circuit breaker. Job done, The hardest part was getting past the fear of repairing my first dishwasher.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDaniel from Sonora CA

Original seller stated at least $350 to trouble shoot and repair dishwasher or $600 to replace.

Using a screwdriver, I was able to obtain part numbers from Circuit Board from the inside of the Dishwasher door and confirm the part numbers from your web site. Then, I was able to order an $88 part and repair the dishwasher.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 4 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerDouglas from Gurnee IL

Release handle broke on dishwasher

First I had to cut the two screws holding the dishwasher in place with a sawsall. I then pulled the machine out and unlatched the door. I then unscrewed the inside panel of the door to access the broken handle. Next I removed the broken handle. I then googled my dishwasher and ended up at partselect. I accessed the schematic drawing for the dishwasher to determine which part was broken and get the part number. I then ordered the part which I recieved in two days. I then put in the new handle and replaced the two sdrews holding the dishwasher in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

76-88 of 88