Door Handle and Latch Assembly with Switches

PartSelect Number PS2180048

This bisque door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. Please NOTE: The bisque handle is no longer available separately. Only available with this assembly.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failed.
  • Door won’t close.
  • Will not start.
  • Compare At

    $32.77
  • You Save

    $5.46
  • Your Price

    $27.31
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 88 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerrobert from mount Airy MD

Latch broken

Turn off power(curciuit breaker) to dishwasher, Removed screws from around inside door edge, then pulled front away slightly pulled latch assembly out about six inches, disconnected wire connectors from handle asembly, discarded old assembly, attached connectors to new assembly, reinstalled in place, replaced screws, turned power back on, closed door repair complete and works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJoseph from Melbourne FL

Door handle inop

Unscewed 11 scews, unpluged electrical connections, Of course, made sure power was diconnected,replased hander according to website directions, very simple, took ten minutes. Thanks. You saved at least $100.00 dallars

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers

Customerrobert from batavia OH

Door handle broken on inside, very hard to operate

Removed the inside panel of the door, removed the latch assembly using a pair of pliers to release the wire connectors. Installed wiring on new door latch assembly. Placed new latch inside of door and reinstalled the inner door panel. Tested the repair, works fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBill from Columbus OH

Broken latch handle

So easy a Cave man could do it. Remove 8 screws, prop open inner cover, lift out old latch unit, unplug power switch leads and replace. I did this with the power on but recommend turning it off for your safety. Very easy and part arrived in 2 days.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerWilfred from Bristol CT

The original door latch assembly broke at the two plastic pivot points

replaced assembly by removing screws around inside of door and opening up interior door and unplugging two wires. removed failed unit and put in the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerDwight from Cypress TX

The plastic door latch broke

First, I removed the screws holding the inter liner to expose the broken part. I then removed the handle assemble, the broken part. I then got on the internet and serached for a parts place replacement company and I found Parts Select. I entered my request and purchased the replacement part within minutes. The part arrived in a couple of days and I installed it without a problem. Great service!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerThomas from CUMBERLAND FORESIDE ME

Door latch failed to operate

Remove screws holding the panel inside the door.
Use weight to keep the door open.
Disconnect connectors at the door latch.
New latch fits in nicely, replace connectors.
Screw the door panel into place.
The hard part: separating the 2 connectors from
the micro switches on the latch.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerPhillip from Clarks Summit PA

Handle broke inside the door

Turned power off at the breaker. Opened the inside skin of the door by removing torx screws. Broken handle came right out. Released power supply clamps from old switch and removed wiring harness. Attached power cable to replacement switch. They were tricky to seat properly. Reset handle and closed door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerDennis from Golden CO

Handle (button) was broken

Be careful when ordering. The Door Latch cost more than the Handle and Door Latch which is confusing. The return was easy.

First, remove the 12 Torx screws holding the the inside door panel. Second, unplug the old Handle and Door Latch. Third, plug in the new Handle and Door latch. Fourth, reposition the door panel and reinstall the 12 Torx screws. Done

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerLeonard from Trufant MI

Replaced latch assembly

Turn off power at fuse box
Remove screws from inner door panel
Lift door panel up - pull out latch assembly
Pry off wire connectors from switches on old latch
Reinstall wire connectors on new switches
Place new latch on door
Reassemble door panel
Turn power on

Have replaced latch once before - 3 year life
Is pretty straightforward

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerScott from Baltimore MD

Handle broke

Could not easily remove the wires from old switches that are connected to the broken handle, but could remove the switches and reuse them on the new handle assembly. Just needed the handle assembly only (not handle assembly with switches).

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerTheodore from Chesterland OH

Broken handle on dishwasher

First turn off power to dishwasher. I then got dishwasher open and removed screws on inside. I then found the broken handle and I then disconnected the wired connections from the handle and slid it out. searched for it on partselect.com . They had it in stock, I ordered it on a Saturday and received it on the following Tuesday. I installed it and it worked great. I will use this site again for any parts needed in the future.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerCliff from Elyria OH

Door handle

Removed interior front of door, about 8 screws. Disconected the wiring from the door handle after turning off the power. Unscrewed the old door handle and replaced with new on after attaching the wires. This is the fourth door handle on a six year old appliance. Two were under warrenty plus the original. This would have cost about $125 if the appliance store had done the work instead of $30.00.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDavid from Spring Hill FL

The dishwasher door wouldn't open

I removed the screws from the inside of the door that mount the inside panel to the door frame. The latch assembly is mounted with 2 of these screws. I disconnected the wires on the old latch assembly and installed them on the new assembly. Note: the connectors are color coded and need to go on the correct side of thelatch assembly. Then put the assembly into place on the door frame. Then I replaced the inner panel using the screwsw previously removed. I then tested the latch-works perfect. Thanks Partselect.com...you are the best!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerJames from Holly Springs MS

Handle/latch had broken

Replacement took maybe 3 minutes.

If you can not replace this part, then you have no business owning a home or going to the bathroom by yourself.

PartsSelect was economical and shipping was lightening fast. I'll be back for all my appliance parts needs.

Help other customers find the most helpful instructions.

Were these instructions helpful?