2180047-1-S-Whirlpool-W10130695-Door Handle and Latch Assembly with Switches
2180047-1-S-Whirlpool-W10130695-Door Handle and Latch Assembly with Switches 2180047-2-S-Whirlpool-W10130695-Door Handle and Latch Assembly with Switches 2180047-3-S-Whirlpool-W10130695-Door Handle and Latch Assembly with Switches http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/56225.gif

Door Handle and Latch Assembly with Switches

PartSelect Number PS2180047

This part includes the black handle, latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failure.
  • Will Not Start.
  • Door won’t close.
  • Leaking.
  • Compare At

    $34.61
  • You Save

    $5.77
  • Your Price

    $28.84
In Stock
Order within the next 6 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Handle and Latch Assembly with Switches

Part Number 2180046

This part includes the white handle, door latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

Order within the next 6 hrs and your part ships today!
$28.63
In Stock

Door Handle and Latch Assembly with Switches

Part Number 2180048

This bisque door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. Please NOTE: The bisque handle is no longer available separately. Only available with this assembly.

Order within the next 6 hrs and your part ships today!
$29.29
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 330 reviews What's this?
106-110 of 330
 

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerSean from Ronkonkoma, NY

Handle broken on dishwasher

Removed 12 screws holding down the interior door. Pried interior door off. Removed old handle assembly. Pulled electric leads off of old relays and put on new relays. Inserted the assembly into the door and positioned lining up the screw holes. Screwed interior door panel back on. Things to watch for. The stainless steel interior door panel is very sharp. I cut my thumb deeply when trying to separate the interior door panel from the door. I suggest you wear kevlar gloves when doing this or just be very careful. Also the electric leads are on very tightly. I had to use a pliers to get them off of the old relays. The new assembly must be lined up with the screw holes before screwing the interior door panel back on. Very simple repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

Tools

CustomerRobert from New Freedom, PA

The latch assembly wears every year.

I switched off the circuit breaker to my dishwasher. I removed all the screws from the hatch on the inside of the door with the star-shaped allen wrench. I lifted the hatch off the inside of the door and removed the old latch assembly. I had to remove the switches from both sides of the new assembly and use the old switches on the old assembly. That way I didn't have to rewire the new assembly's switches. I inserted the new latch assembly and reset the hatch over the top of the assembly. Then I screwed the hatch back to the door and turned on the circuit. Simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDonald from Savannah, GA

Plastic latch broke

Took the screws out along the inside panel of the door, unpluged the electrical connectors, removed the old part, plugged the connectors onto the new part, set in place, put the door liner back in place, and replaced the screws. Took about 5 minutes, after my wife had been complaining about it for three weeks. Should have ordered sooner!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerDeborah from Fayetteville, GA

The plastic handle broke, door wouldn't open without pulling it hard.

We took the inner door panel off (about 12 screws), then took the 2 sensors off the old latch and put them on the new one then reassembled the door. The only problem I have now is that once I empty the dishwasher the sensor doesn't re-set to show the dishes are no longer clean.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerDave from Fairport, NY

Latch handle broken, miserable to open and close

First, I was blown away by the speed at which the part arrived. Kudos! The quality is exceptional. The repair itself is extremely straightforward. If you are not the handy type, it's still simple, but please shut off the breaker to ensure no power is going to the dishwasher.

I used a power screwdriver fitted with a T-20 Torx bit and unscrewed all the screws holding the inner door liner on. The handle is held in place by the center two screws at the top of the door. Once the screws were removed, I propped the inner panel up with a short PVC tube (anything non-conductive and about 6" long will work fine). I pulled the old handle out, noting which color wires went to which side of the handle. Note the power connectors are firmly attached due to the inward angle of the power leads on the switch. This makes them seem difficult to remove. They are not. Do NOT use pliers or other tools, you risk crushing the power connectors! Firmly grasp the connector and pull straight back, wiggling it slightly if needed. When the connector is free, immediately attach it to the correct side of the new handle. Unless you've shut the power off, these leads are LIVE. Pay attention to what you're doing. Once both connectors have been transferred to the new handle, position the handle correctly, ensuring the screw holes line up with the inner panel. Insert these two screws first but do not snug them down. Insert the rest of the screws, ensuring the inner panel is properly seated and all the screws line up correctly and are not cross-threaded. Tighten down all the screws and you're back in business.

My wife and I have both noted, as others here have, that this replacement handle feels significantly better than the original.

The repair is very straightforward, quick, and easy. Enjoy!

Help other customers find the most helpful instructions.

Were these instructions helpful?

106-110 of 330