2180047-1-S-Whirlpool-W10130695-Door Handle and Latch Assembly with Switches
2180047-1-S-Whirlpool-W10130695-Door Handle and Latch Assembly with Switches 2180047-2-S-Whirlpool-W10130695-Door Handle and Latch Assembly with Switches 2180047-3-S-Whirlpool-W10130695-Door Handle and Latch Assembly with Switches http://www.partselect.com/Schematics/Maytag/58126.gif

Door Handle and Latch Assembly with Switches

PartSelect Number PS2180047

This part includes the black handle, latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failure.
  • Will Not Start.
  • Door won’t close.
  • Leaking.
  • Compare At

    $35.35
  • You Save

    $5.89
  • Your Price

    $29.46
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Handle and Latch Assembly with Switches

Part Number 2180046

This part includes the white handle, door latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

$29.25
On Order

Door Handle and Latch Assembly with Switches

Part Number 2180048

This bisque door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. Please NOTE: The bisque handle is no longer available separately. Only available with this assembly.

$29.54
On Order

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 330 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Stephen from Seven Hills, OH

Interior parts on the handle / door latch cracked

After removing the door cover, and unplugging the dishwasher, I detached the 2 electrical connectors, installed them on the new handle / door latch, aligned it, and reinstalled the door. Once I had a few screws in place, I plugged it back in and it was working. I finished reinstalling the remaining screws, and it was set.
Simple and saved a lot of money.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Steve from Plano, TX

Handle broken

Since the handle replacement seemed a bit trickier, I opted for the complete assembly. Amazingly simple repair. Remove inside front panel by removing 11 screws using allen wrench (torx or star point if you have it, but allen if not), gently pry contacts from old assembly with flat blade screwdriver and push into place on the new one, set assembly in place, replace screws. Done.

It couldn't be any easier. PartSelect is great. I've purchased refrigerator icemaker from them in the past and it was easy also. Parts arrived very quickly in both cases. Installation instructions and sometimes videos provided. Highly recommended.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Vincent from Alexandria, VA

The latch no loger unlactche the door.

To repair I removed the Torx screws around the inter edge of the door. This also released the part to change. I grabbed the exposed part of the electrical contact with the tip of a pair of needle nose pliers (rather than the electrical plug to remove). Keeping a tight grip, I used the rest of the pliers to push against the plug. This scoots the plug off a little. So I moved where the pliers grip close against the plug again and repeated. you only move a quarter of an inch at a time but it takes very little strength to push the plug off. This happen without damage to the plug. After this I pushed the new plug on. Then I moved tot he second plug. By doing it one at a time, I did not mix up the plugs.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Brett from Lewisville, TX

Door latch broken

I needed a new latch assy. and the control panel because the mount for the latch on the panel broke. $150 for parts.Just remove the screws from the inside of door. Set panel to the side. Open the controller box to gain access to the electrical ribbon for the control panel.Slide the lock at the connector to release the ribbon.Insert new control panel ribbon then slide the lock on the connector.Put door panel togeather with screws. DONE!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Robert from Rochester, NY

Broken latch

Checked various online sites for repair tips. Shut off the power at the main breaker. Used a star bit in my cordless driver and removed interior portion of door. Marked the wires and removed the old latch. Install new latch and plugged in the wiring. Reinstall the interior portion of door and turned on the power. Done. Very simple repair. Very fast delivery from PartSelect. Thank you!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Wrench set
Customer: Dennis from Tequesta, FL

Door latch broke

I removed the screws with a star bit. I didn't have to take out the last couple of screws. pulled out the old latch unpluged the two wire conections(this was alittle difficult because they were sort of stuck)so I used a pair of pliersa and carefully pulled them off. snapped the new one 's on puthe new latch in place and bada-bing I was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Francis from Somers Point, NJ

Broken latch

Repair was a piece of cake, start to finish was less then 15 minutes. It took longer to find the correct circut breaker to turn off the power to the dishwasher as the previous owner of the home didn't mark the panel box very well. Very pleased with dealing with your company, your website was easy to use, ordering was a breeze, part was delivered quicker then expected, the repair was very easy to complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Gary from Lake Lure, NC

Door latch handle broke

Removed the stainless screws that hold the door and the panel together. Seperate the two,no need to remove or unplug anything else. Unplugged the two connectors on the old latch and plug them on the micro switches on the new latch and handle. Used a large flat blade screw driver to pry the connectors off, they are on real tight. Aleign the latch with the screws/holes in the white panel and put the two back together. Easy!!! Also, thanks to PartSelect for the great service, great parts, and best price ever.
GJB

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: James from Richfield, WI

Broken latch -door difficult to open

Flip off circuit breaker to dishwasher. Remove 11 screws holding inner door panel to door. Pull inner panel back to separate from door. Disconnect microswitch connectors from old switch noting location. Install new latch assy. It mounts with two of the door panel screws. Like others my plastic tabs were broken so I added some Silicone adhesive to give it a little more support. Reinstall the panel with the 11 screws. Turn the breaker on and you are done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Teresa from Loveland, OH

Broken handle

I read all the repair stories online for this part#. The top story had exactly the right steps. I did the whole repair in less than 15 minutes. It took me longer to turn off the power to the dishwasher than it did to repair. I unscrewed the 11 screws around the edge on the inside of the door (used small electric screwdriver so that went really fast), and used the pliers to help disconnect the two wired connections. Connected the new latch and put back screws. Done. Sweet!

My customer service rep was top notch on the phone. Really patient and helped me figure out which part I needed. I would recommend to anyone.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Wrench set
Customer: Arnold from Philadelphia, PA

Door latch broke

unscrewed all the screws on inside door,disconnected the door latch assembly replaced it and put all the screws back in and the unit worked fine

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: philip from emmaus, PA

The release handle no longer worked.

After throwing the circuit breaker, I removed the 8 torx screws holding the interior door to the exterior door, which also released the door latch mechanism. I then used pliers to remove two wiring connectors from the latch. Then, simply, attached the wiring connectors to the lugs on the new latch assembly, positioned the latch assembly, then put the torx screws back. Threw the breaker back on, and it was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Garnett from Mount Juliet, TN

Broken latch handle on dishwasher door

Remove screws that hold the inside door cover.
The latch assembly is held in place by two of the cover screws.
The broken latch falls out when you loosen and partially lift the cover.
Slide the new latch assembly in and re-install the cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Gary from Scottsdale, AZ

Replaced handle

went really easy

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Henry from OFallon, MO

Door latch broken

As others described - unscrew inside cover and replace - difficult to pull wiring off awitches, but otherwise very easy and works like a champ.

Help other customers find the most helpful instructions.

Were these instructions helpful?