2180047-1-M-Whirlpool-W10130695-Door-Handle-and-Latch-Assembly-with-Switches.jpg
2180047-1-S-Whirlpool-W10130695-Door-Handle-and-Latch-Assembly-with-Switches.jpg 2180047-2-S-Whirlpool-W10130695-Door-Handle-and-Latch-Assembly-with-Switches.jpg 2180047-3-S-Whirlpool-W10130695-Door-Handle-and-Latch-Assembly-with-Switches.jpg

Door Handle and Latch Assembly with Switches

PartSelect Number PS2180047

This part includes the black handle, latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failed.
  • Will not start.
  • Door won’t close.
  • Leaking water.
  • Compare At

    $28.75
  • You Save

    $4.79
  • Your Price

    $23.96
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Handle and Latch Assembly with Switches

Part Number 2180046

This part includes the white handle, door latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

$26.31
In Stock

Door Handle and Latch Assembly with Switches

Part Number 2180048

This bisque door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. Please NOTE: The bisque handle is no longer available separately. Only available with this assembly.

$26.77
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 330 reviews What's this?
 

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerDAVID from SAN FRNACISCO CA

Latch handle broke

I removed eight screws and installed the new parts. The replacement factory parts are better then the originals and the latch handle should not break again. Had I called for service it would have cost $149 (not incuding parts) just for them to show up to look at it and tell me that they need to order these same parts. Plus, I would have had to wait an addtional two weeks for them to order the parts and come back to do the repair since most service companies do not carry parts with them. Their parts are marked up and would have cost 30% more for the same factory parts I order from you. The parts including shipping were $36.30 and I had the repair completed in three days, including standard shipping time. Quite a savings! and very easy to complete the repair.

Thank you!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerDAVID from KENT WA

Handle broke

Took off broken handle and replaced it with the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJohn from New City NY

Door handle broken

The video instructions were very clear and easy to follow. After turning off the power I removed all the screws and lifted the panel. As instructed I removed the electric connectors with a flat head screwdriver and reattached them to the new door latch assembly, screwed the panel back to the door and turned on the power. The new door latch seems to be a little sturdier than the original one, hopefully it will last longer. I didn't think it was going to be this easy. I haven't run the dishwasher yet,but I'm sure it will work fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerTerry from Duncanville AL

Door latch broke at the hindge

Remove torx tip screws from inside door panel located along the outside rim. Pulled door latch out (don't for get the power must be off). The switch pins are very hard to get off for such a small part(they just pull out, Still very hard). plug in conectors to new switch,Found it easy to mark top of each switch with a marker so they will not get put on backwards allowing dishwasher to run with the door open. set door latch back in place push front panel back to door and install all screws

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichael from Evanston WY

Door latch broken

I turned off the power to the dishwasher. Removed screws from inner door. Removed the two wire groups, black and white, from origional door latch unit, installed new latch unit, reconnected wire groups, replaced inner door screws, restored power. The whole process was very fast and easy. I saved alot on the repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerElliott from Newnan GA

The door latch had broken from switch assembly.

Removed the screws holding inner door panel to door. Two of the screws hold the latch assembly also. Unplugged the wiring from the assembly then plugged them to the new assembly. Reattached inner panel to door. Easy as 1, 2, 3.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerFrank from Mount Prospect IL

Broken door latch handle

I just shut off power at the breaker box, then removed the 11 torx screws around the inside door liner. The hardest part was keeping the door open; the door springs get pretty aggressive after you remove the liner. The handle and latch assembly is basically held in place by two of the screws. I disconnected the two wire connectors, then reconnected the new assembly and set it in place. Put in about half the screws, turned on power and tested the operation. After confirming that the latch released and the machine functioned, I put in the rest of the screws and tightened them gently. Done. Working great now, but I suspect that plastic handle will break again before the machine does.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJairo from casselberry FL

Latch handle broke.

Cut the power to the appliance, removed screws in the inside side of the door, which released the "Handle & Door Latch Complete Assembly with Switches". removed the conections to the switches, and reconected them to the new part. Then placed it insuide the door where the other one was and bolted it back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerCraig from Chillicothe IL

Handle broke

Removed inner panel from door. Put new handle in place. Switched wires to new handle. Replaced inner door panel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerRichard from Hollidaysburg PA

Door sticks.....difficult to open

The repair went very well. The new latch was exactly the same as the broken one. I removed 9 torx screws, dropped the front, unpluged the door switches and installed the new latch. Time??? Well, I think that it took me longer to locate my torx tool than it did to install the new part. The total time was 15 to 20 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerAlan from Edina MO

Door latch hard to open

Open door take all scews off inside panel lift up handle is right there. Take out unplug two connectors, reattachto new handle, put back togather.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerFranklin from Sylvania OH

Original handle broke at hinge point

approximately 10 screws (torx) to remove, the new handle is built better than the original, plastic reinforced at hinge point with a metal hinge pin... the original had a plastic pin for a hinge... Now better than ever thanks...

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerStephen from Seven Hills OH

Interior parts on the handle / door latch cracked

After removing the door cover, and unplugging the dishwasher, I detached the 2 electrical connectors, installed them on the new handle / door latch, aligned it, and reinstalled the door. Once I had a few screws in place, I plugged it back in and it was working. I finished reinstalling the remaining screws, and it was set.
Simple and saved a lot of money.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerSteve from Plano TX

Handle broken

Since the handle replacement seemed a bit trickier, I opted for the complete assembly. Amazingly simple repair. Remove inside front panel by removing 11 screws using allen wrench (torx or star point if you have it, but allen if not), gently pry contacts from old assembly with flat blade screwdriver and push into place on the new one, set assembly in place, replace screws. Done.

It couldn't be any easier. PartSelect is great. I've purchased refrigerator icemaker from them in the past and it was easy also. Parts arrived very quickly in both cases. Installation instructions and sometimes videos provided. Highly recommended.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerVincent from Alexandria VA

The latch no loger unlactche the door.

To repair I removed the Torx screws around the inter edge of the door. This also released the part to change. I grabbed the exposed part of the electrical contact with the tip of a pair of needle nose pliers (rather than the electrical plug to remove). Keeping a tight grip, I used the rest of the pliers to push against the plug. This scoots the plug off a little. So I moved where the pliers grip close against the plug again and repeated. you only move a quarter of an inch at a time but it takes very little strength to push the plug off. This happen without damage to the plug. After this I pushed the new plug on. Then I moved tot he second plug. By doing it one at a time, I did not mix up the plugs.

Help other customers find the most helpful instructions.

Were these instructions helpful?