2180046-1-S-Whirlpool-W10130694-Door Handle and Latch Assembly with Switches
2180046-1-S-Whirlpool-W10130694-Door Handle and Latch Assembly with Switches 2180046-2-S-Whirlpool-W10130694-Door Handle and Latch Assembly with Switches http://www.partselect.com/Schematics/Maytag/58126.gif

Door Handle and Latch Assembly with Switches

PartSelect Number PS2180046

This part includes the white handle, door latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failure.
  • Will Not Start.
  • Door won’t close.
  • Leaking.
  • Compare At

    $35.10
  • You Save

    $5.85
  • Your Price

    $29.25
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Handle and Latch Assembly with Switches

Part Number 2180047

This part includes the black handle, latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

$29.46
In Stock

Door Handle and Latch Assembly with Switches

Part Number 2180048

This bisque door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. Please NOTE: The bisque handle is no longer available separately. Only available with this assembly.

$29.54
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 243 reviews What's this?
26-30 of 243
 

2 of 2 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Bruce from Canandaigua, NY

Broken latch

Turned off the power at the panel board. Took off the front panel. (The screws are torque screws, so you need that kind of driver). Removed the two electric leads. They are just connector type leads going to the switches. Pluged the leads onto the correct sides of the new latch assembly and reversed the procedure to put the panel back in place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Joseph from Southbury, CT

Latch on door broke could not close dishwasher

Turned of power at the circuit breaker first. Removed the hex nuts from the inside of the door. Latch is loose know and just need to unplug the power cords from both sides. Install new latch by reattaching the two power cords to it and reassemble. Very easy and very fast shipping had part the next day with regular shipping.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Glenn from Arlington, VA

Handle to dishwasher was broken.

Not bad at all. Took inside door panel off. Removed broken part. A little tricky to remove/replace the electric nodes. Decided to use the old ones rather than using the new ones that came with the part. Just easier than removing wires. Put door back together with new handle in place. Good to go...

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Paul from Milwaukee, WI

Door latch mechanism worn out

Partially removed stainless inner part of door by removing 10 screws enabling simple removal of latch assembly. Put new assembly in its place and remounted inner stainless door in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Jack from Carson City, NV

Latch handle hinge failure

Remove 11 screws holding cover to door, split cover from door, remove latch assembly, obtain new part and reassemble. No problems. New part is improved so hinge should never break. Satisfied 100%

Help other customers find the most helpful instructions.

Were these instructions helpful?

26-30 of 243