2180046-1-S-Whirlpool-W10130694-Door Handle and Latch Assembly with Switches
2180046-1-S-Whirlpool-W10130694-Door Handle and Latch Assembly with Switches 2180046-2-S-Whirlpool-W10130694-Door Handle and Latch Assembly with Switches

Door Handle and Latch Assembly with Switches

PartSelect Number PS2180046

This part includes the white handle, door latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failed.
  • Will not start.
  • Door won’t close.
  • Leaking water.
  • Compare At

    $32.21
  • You Save

    $5.37
  • Your Price

    $26.84
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Handle and Latch Assembly with Switches

Part Number 2180047

This part includes the black handle, latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

$24.44
In Stock

Door Handle and Latch Assembly with Switches

Part Number 2180048

This bisque door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. Please NOTE: The bisque handle is no longer available separately. Only available with this assembly.

$27.31
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 243 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerJohn from Smithton PA

Handle broke

Removed the Handle Assembly. I did not have a model number tag on the dishwasher so I found a whirlpool assembly that was looked like the part I removed. When the part arrived I noticed that it had a steel rod at the pivot point not like that one that I removed that had plastic pivots. During installion I had trouble removing the wiring connectors from the old switch. I removed the connections with a pair of needle nose pliers. Everything was easily removed with phillips and star screwdrivers.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerCharles from Bowie MD

Broken latch assy

I came to your site, reviewed the prior repairs for my maytag appliance and it went perfectly. To all those who went before me into the dark night of appliance repair I salute YOU!! Your instructional comments were right on. I too, had a small problem removing the electrical leads to the switch assemblies but eased them from their contacts with an insulated screwdriver. The rest of the installation was a breeze. I would caution those who are not prone to reading instructions that the assy came with NO instructions. However, armed with this sites' instructions the job was a breeze. The cost of the assy was outstandingly reasonable. The estimated repair by the National Maytag Repairman was litteraly ten times the cost of the part. Way to go! Hopefully none of my other appliances will break, but if they do I'll be back. Thanks again! Chuck Cooke, Bowie, Maryland.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Pliers, Screw drivers

CustomerEdward from Colonia NJ

Straight foward repair of latch......

This repair was straight forward and easy.....

Once you remove the inside panel of the door the latch becomes exposed and can be removed.

(For safety shut the power of at the circuit breaker for this appliance.)

Once the power is off the only problem I encountered was the electrical connection for the latch were stuck on.

You will need to use one or two pliers to pull the connections apart.

Once apart install the new latch, and replace all screws in the order you removed them.

This repair will take between 15 and 30 minutes depending on your ability to make home repairs.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerGary from Walkersville MD

The handle/latch had broken

You need to unscrew the inside door liner with a Torx screwdriver; once the door is unscrewed, you can pry it up and prop it up so you can get to the latch assembly (there are several wired connections you can't unhook easily - but you don't need to so it doesn't really matter). Oh yeah, you might want to make sure the power is turned off at the breaker. The latch assembly pulls right out but I could not get the power plugs to come loose from the prongs, so I just used the switches that were on the old switch; simply pry the little clips holding them off and remove the little switches. If you didn't turn the power off, make sure you don't touch the plugs. Put the latch back in place; make sure the old handle isn't still in the handle area; I didn't check and it was still there; I put it all back together and it didn't work. Took it apart, took broken handle out. Redid; worked great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

Tools

CustomerSandra from Sherman TX

Plastic of latch broke making it impossible to open and close the door

The door was open when the latch broke or we would not have been able to get into the dishwasher to repair it. We had to purchase a star-shaped screwdriver. Lowe's had one for about $7. After switching off the breaker, we removed the inner door panel to access the latch. The old latch was very difficult to remove, but finally came free with perseverance, two pairs of pliers and a lot of elbow grease. The new latch plugged right in with no problem. We replaced the door panel, turned the breaker back on and the dishwasher worked just like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGregory from Long Beach CA

Handle broke

First shut off the power to the dishwasher at the circuit breaker. Removed the torq screws on the inner door. Disconnected the old part and hooked up the new part. Took longer to unscrew and screw the door back on then to replace the part. Works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerAdam from Richmond VA

Cheap plastic pivots on the door handle broke

Removed cover. Took out the old handle/switch assembly and related broken plastic pieces about the door enclosure. The new handle/switch assembly has a steel rod in place of the cheap plastic pivots. Removed connectors to limit switches. Put new assembly in place of the old one. Screwed the cover back on. Washed dried chilli encrusted bowls. They got clean.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMatthew from East Haven CT

Door latch assembly broken

After shutting off the power to the unit I removed the torx head screws that hold the inner panel to the door. Next I disconnected the two plugs that attach to the microswitches on the handle. I then installed the new assembly and attached the two plugs to it. Then re-installed the inner panel. Done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers

CustomerLou from Fairport NY

The door latch was broken

First I turned off the power to the dishwasher. Then I removed the 11 screws form the inside of the door panel. The inside door panel will lift up for easy access to the latch assembly. Remove the latch assy. I purchased the latch assembly with the switches. You will need a needle nose pliers to remove the 4 wires. Install the wires on the new switches and put the new latch assy in place. Set the inside panel back on the outside panel and install the screws. Turn the power back on and you're done. Took about 15 minutes start to finish. Probably saved around $200. Piece of cake!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:30 - 60 mins

Tools

CustomerJohn from Oshkosh WI

Plastic latch broke

had to take the inner cover off the dishwasher door. replacing the broken part was very easy after that.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerGary from Indianapolis IN

Latch on dishwasher broken

Simple job - removed screws from inside of dishwasher door, lift out inner door and remove old latch assembly, pulled wires from latch assembly (had to pry apart with screw driver), attached wires to new assembly and placed new asembly in door, replaced innner door making sure screw holes lined up with latch assembly holes, reattached inner door with screws. Latch works like new. The whole process took around 15-20 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRalph from Appleton WI

Plastic door handle broken

Parts arrived quickly. Diagram and part numbers are confusing which caused a second order for the correct part-the handle attached to the switch assembly as one unit. It costs less than the sans handle assembly.
Installation quick and easy-remove door panel screws-set panal aside. No need to remove soap dispencer connection as there is enough wireing slack to get the panel out of the way. Remove wire clips from micro switches-note location of each pigtail and remove broken handle/assembly. Install new assembly and put all back together.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerVincent from Salt Lake City UT

Broken latch assembly

Took the hex screws out that hold the inside cover on the door of the dishwasher. It exposes the latch assembly. (OH YEAH, TURN THE POWER OFF. UNPLUG, OF POSSIBLE, TURN FUSE BOX SWITCH OFF..CAN"T BELIEVE I FORGOT AND GOT I NICE LITTLE JOLT) Undo the two wire leads attached to the latch assembly. Put the new assembly in (Now it comes fully assembled) attach the wire leads, screw it back in and it's done. Piece of cake. Even the cust service rep was aware of this part..."oh yeah THAT piece". Guess they've had tons of problems with this part. But the price was right and install was absolutely no problem. I'll buy here again.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customerdoris from harrisonville MO

The door latch broke

I took the screws out of the door and un pluged ths brooken latch pluged in the new one replaced the door screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 1 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Socket set

CustomerKen from Kuna ID

The latch was broken and we replaced it

Power to the dishwasher was turned off from the fuse box. The dishwasher door was disassembled by removing the screws. The broken latch assembly was removed and the wires connected to it was also disconnected. The new latch assembly was put in place and the electrical wires were attached to the new assembly. The dishwasher door was then reassembled and it's all done. To about 5 minutes total to do it.

Help other customers find the most helpful instructions.

Were these instructions helpful?