2180046-1-S-Whirlpool-W10130694-Door Handle and Latch Assembly with Switches
2180046-1-S-Whirlpool-W10130694-Door Handle and Latch Assembly with Switches 2180046-2-S-Whirlpool-W10130694-Door Handle and Latch Assembly with Switches

Door Handle and Latch Assembly with Switches

PartSelect Number PS2180046

This part includes the white handle, door latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door latch failed.
  • Will not start.
  • Door won’t close.
  • Leaking water.
  • Compare At

    $31.57
  • You Save

    $5.26
  • Your Price

    $26.31
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Handle and Latch Assembly with Switches

Part Number 2180047

This part includes the black handle, latch and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open.

$23.96
In Stock

Door Handle and Latch Assembly with Switches

Part Number 2180048

This bisque door latch with the switches is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. Please NOTE: The bisque handle is no longer available separately. Only available with this assembly.

$26.77
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 243 reviews What's this?
241-243 of 243
 

0 of 2 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerAL from Bonney Lake WA

Door latch broken - would not start on "auto clean" setting, panel lights blinking continuously

Switched off circuit breaker to dishwasher circuit .

Removed (11) screws on inside parameter of door. (Use "star" shaped screwdriver bit) Folded inside door panel to right to expose latch assembly and create slack in wires. Removed wire leads from old latch assembly switches - being careful to note that the white wire leads connnect to the right side switch of the latch assembly and the black ones to the left.

Discarded old latch assembly (Latch handle fell off of old assembly when I removed the old assembly - plastic hinge pins had sheared off.)

Connected wire lead terminals to matching terminals on new latch assembly and reassembled door. Turned circuit breaker back on. Dishwasher works like new!

(Make sure "cleat tabs" at the bottom of the inner door panel go to the outside of the outer panel when re-assembling door. Check for leaks when running first load.)

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerOtto from Reno NV

Latch handle fell off.

First I took the door inner cover off to see if I can repair it, fat chance. Reinstalled door cover to be able tob use dishwasher.
Went on the internet to order new handle which is not available locally.
Went to Sears to buy special screwdriver.
Installed new handle and switch in about 10 Minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 5 people found this instruction helpful

Parts Used

  • Door Handle and Latch Assembly with Switches

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerDavid from Alexandria VA

Latch was "sticky" hard to open and close

It was trivial to remove the screws holding the back to the front of the door. I thought I needed to completely remove the door so I started taking the wiring connectors off -- but that was not necessary -- the latch handle is held by two of the screws holding the door together; it was easy to unplug the wires from the handle, pull it out and pop the new one in. Really less than 15 minutes if I hadn't started taking the the other wiring connectors off (and worrying if I remembered which way they went).

Help other customers find the most helpful instructions.

Were these instructions helpful?

241-243 of 243