2174395-1-S-Whirlpool-R9900256-Outer Door Panel
2174395-1-S-Whirlpool-R9900256-Outer Door Panel 2174395-2-S-Whirlpool-R9900256-Outer Door Panel

Outer Door Panel

PartSelect Number PS2174395

White in color.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $92.78
  • You Save

    $15.46
  • Your Price

    $77.32
In Stock
Order within the next 9 hrs and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

GLASS- DOO

Part Number 2166925

$52.12
No Longer Available

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 2 reviews What's this?
1-2 of 2
 

2 of 3 people found this instruction helpful

Parts Used

  • Outer Door Panel

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerNat from Raleigh NC

Crack in the lower left corner of the outer door panel

Thankfully, one of your customers had submitted the repair description. I followed along as best I could. I would add to the description that one should pay attention to the details as the door is taken apart -- it can only be put back together in one way. My door was a bit stuck together in a couple places making it a bit more difficult to disassemble. One last item, after removing the handle, the door pivots off the door structure at the hinge end -- I struggled with this a bit because my handle was stuck on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 6 people found this instruction helpful

Parts Used

  • Outer Door Panel

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerEric from Nashville NC

Door panel was broken

I removed the inside plate and removed the two screws that held the handle on. I removed the existing door panel and replaced it with the new one. I then replaced the handle with the two screws and snapped the inside plate back into place. Getting the handle to realign once the new door panel was in place was the trickiest part. This repair cost me $40 when a new microwave would have cost over $200.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2