| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJoann from Birmingham IA
Would not rotate
removed bottom panel removed old motor and replaced
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJaime from Las Vegas NV
Turntable would not move.
First I removed 4 screws at the bottom of the microwave that holds the cover in place. Disconnected power at the front of the microwave with the 4 pin connector. Disconnected 2 wires at the motor. Removed 2 screws and took out motor. Put in new motor, reconnected 2 power wires and then the 4 pin. Put cover on with 4 screws. DONE. Total time: 7 minutes. (I took my time at this because I like to do it right the first time.) I saved $40.00 on the motor ordering it on-line and received it in less than a week. Thank You! I cannot say it enough, Thank You! Thank You!
|