No Longer Available

PartSelect Number PS2167231

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 17 reviews What's this?
 

1 of 1 people found this instruction helpful

Parts Used

  • No Longer Available

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMyron from Port St Lucie, FL

Turntable wouldnt turn

remove 3 screws under cabinet,pan drops down giving access to turntable motor.Inside oven remove turntable and driven spur.
Remove single screw under cabinet disconnect plug from motor and replace with new motor. install in reverse order.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

  • No Longer Available

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerwilliam from harrison, MI

Would not turn

remove 2 screws remove motor disconnect wires = reverse procuder

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 6 people found this instruction helpful

Parts Used

  • No Longer Available

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerEric from Greeley, CO

Microwave turntable wouldn't turn

After unplugging the microwave, removed four screws from underneath the front of the microwave, and lowered the panel enough to disconnect the power connector. Then, pulled off the clips providing power to the Turntable Motor. Removed panel entirely to access Turntable Motor. Unscrewed both screws holding motor in place, removed old motor, replaced new motor (realigning the turntable plastic part), reconnected everything in reverse. 10 minutes and done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • No Longer Available

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerJoseph from Saratoga, CA

Turntable would not spin when turned on

I downloaded the repair instruction as directed by your group and proceeded to complete the repairs. The wife had gone shopping so I was able to pull the unit from the wall and made the motor change quickly. If she were there to supervise I would still be doing the repairs. It was simple to search for the parts and order the material. I received the parts in about two days so this really impressed me for the delivery time. If I were to complete any other repairs on appliances my first stop would be to your location. Thank you for saving me from buying a new unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • No Longer Available

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerJennifer from Rainier, OR

Turntable gears stripped out, quit turning

I ordered the part on Thursday and received it the following Tuesday morning.
Taking the cover off the bottom of the microwave was really the biggest part of getting this done. There are a couple of special screws on the back that a regular screwdriver won't fit into, but I got them off with a pair of needle-nose pliers.
Unplugged the motor, took out one screw, lifted off the bushing inside the oven and just reversed the process to install the new motor. Piece of cake!
Putting the cover back on is the most time-consuming part, do it in the right order and finesse it.
Food is going quietly around now!

Help other customers find the most helpful instructions.

Were these instructions helpful?