| |
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:1- 2 hours
ToolsScrew drivers
CustomerJ MERVIN from STRASBURG PA
Broken lamp cover
removed old covers which were cracked and dirty.
the repair part looked exactly like the original but did not fit correctly. i had to do some changing of the size to make it fit. it does not clip in place as it should but we are living with it as it does cover the light bulb. the grease filter is perfect
|
2 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerChristopher from Rochester NY
Light cracked
Removed the screw and took the broken light piece off. I replaced it with a new lamp cover, and re-inserted the screw.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerPeggy from Hastings MN
The cover to my lamps both broke.
Had to put one screw in each. A little hard to reach up. also hard at first to get them in.
|