Quick Question!

Have you ever purchased from PartSelect.com before?

2121513-2-S-Whirlpool-D7824706Q-Replacement Ice Maker
2121513-2-S-Whirlpool-D7824706Q-Replacement Ice Maker 2121513-1-S-Whirlpool-D7824706Q-Replacement Ice Maker 2121513-3-S-Whirlpool-D7824706Q-Replacement Ice Maker http://www.partselect.com/Schematics/Maytag/50671.gif

Replacement Ice Maker

PartSelect Number PS2121513

This is a replacement ice maker. This assembly includes the ice mold and the control device. The water inlet valve pumps water into the mold, which stays there until it is frozen solid and ejected into the storage bucket. The process continues until the bucket is full. This replacement part does not include the cover, shut off arm, wire harness, or the mounting hardware. You will need to use the existing pieces, or order those separately. You will need a nut driver to successfully install this part. Unplug your appliance before you begin any repair work.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker not making ice.
  • Leaking.
  • Ice maker won’t dispense ice.
  • Ice maker dispenses too little ice.
  • Ice maker dispenses too much ice.
  • Will Not Start.
  • Won’t start.

Compare At

$115.20

You Save

$19.20

Your Price

$96.00
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 264 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used:
  • Replacement Ice Maker
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Jim from Saratoga Springs, NY

The ice maker had failed and the inlet was iced up.

The other comments were very useful. After removing the screws, I was able to turn the ice maker assembly enough to reach the electrical harness. This was not easy and required removing the plate at the rear of the compartment. Once removed, replacing with the new ice maker was very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Replacement Ice Maker
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Jeffrey from West Springfield, MA

Leaking ice tray

took the replacement part and removed to 2 salvageable parts from the leaking tray and installed the 2 on the new tray and then reinstalled the whole unit and we again have ice cubes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Daniel from Oakdale, MN

Water leak froze up ice maker

Loosen nuts, remove, replace, tighten - DONE! Beautiful.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Brad from Laredo, TX

Ice maker leaking water causing ice build up

replaced ice maker and ice bucket with really no problems while watching repair video. had ice making within hours and is working wonderful.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Replacement Ice Maker
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Gabriel from Kent, OH

Leaking ice maker tray

Removed the chiller level and ice bin exposing the icemaker assembly.
Unplugged the icemaker assembly electrical connecter.
Used the nut driver to remove three screws that fasten the icemaker assembly to the refrigerator side wall and angle bracket.
Removed Ice tray assembly.
Reversed the steps to install the new icemaker.
Cured the problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Replacement Ice Maker
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: Lee from Wrentham, MA

Replaced ice maker

Thank you PartSelect. Ordered the replacement icemaker for our Amana refigerator, watched the installation video on PartSelect.com. Followed the instructions, took 15 minutes, works like new. Couldn't have been easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Replacement Ice Maker
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Glen from Elberfeld, IN

Revised direction of inlet for water/fill tube

Side by side refrigerators are tough to get two arms inside the freezer side (and do much work) especially to unlatch the power connect. The water tube on this old refrigerator feeds from the back so I took a pair of kitchen shears and made a new opening in the back of the catch basin. Sealed the original opening. Don't know if that was necessary. The video was a big help for this parts change. Much easier than expected. G Keen

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Jim from Lancaster, CA

Thawing element had failed

Followed the video instructions provided by the seller .
THANKS , VERY HELPFUL !!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Replacement Ice Maker
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers, Wrench (Adjustable)
Customer: Kenneth from Goshen, AL

Leaking icemaker/leaking water dispenser

I also ordered a solenoid valve which solved the water dispenser problem. The vidio presentation on your website plus the personal experiences enabled me to easily install the icemaker which solved the leaking icemaker problem. Two small surprises, I thought the electrical wire plugged into the rear of the refrigerator and I didn't know that I would have to cut out part of the icemaker to accomodate for the refil tube. No problem on both surprises. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Replacement Ice Maker
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Donald from Ocala, FL

Ice maker had been overflowing into tray

Removed ice maker.

Bottom freezer made access a tad awkward.

New unit did not come with wiring harness, or wire rod that activates cycle, or the front cover, which required transferring those items from old unit. Instructions on internet did not address this.

Installed new unit.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Rafe from Tuscola, TX

Ice maker stopped making ice.

I turned off the water supply to the refrigerator, and I removed all the food, baskets, and shelving from the freezer unit. I removed three screws holding the ice maker, lowered it, and unplugged the wiring harness. The clip holding the wiring harness in the ice maker was not real obvious, but I found it okay. I took the bail and the front cover from the old ice maker and placed them on the new ice maker. Two of the screw holes for the new ice maker were slotted allowing me to start the screws in the side of the freezer prior to installing the new ice maker, and the third screw was no trouble to start. I really did not need the instructions I ordered, but I am cautious toward having everything I need in case something does not go as planned. This was a very easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Replacement Ice Maker
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Pliers, Screw drivers
Customer: JERRY from BULLHEAD CITY, AZ

Ice maker was not dispensing cubes

disconnected electric harness removed screws installed new ice dispensing unit

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 2 people found this instruction helpful

Parts Used:
  • Replacement Ice Maker
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Lawrence from Astoria, OR

Ice maker stopped making ice.

Researched your web site - determined best bet was to replace the ice maker unit. Ordered the new ice maker and believe it it or not it was here in 3 days and installed EXACTLY as it was stated. Frankly it was a snap and was easier than ever expected. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: michael from boca raton, FL

Entire freezer compartment was cascaded in ice and icemaker had been noisy

Turn off power first or unplug. Get a light so you can see. Read these directions through one time to reduce the learning curve. Remove ice cube bin. 1/4" nut-driver will do most of the work. Remove flexible water fill tube from back of ice cube maker, move to the side, out of the way. Remove screw from "L" shaped bracket from the bottom of maker, close to the front. Two more 1/4" screws to go. There are (2) screws on the top left that hold the maker to wall. Loosen the front screw, but do not totally remove, unit will lift off of front screw. The back screw had to be completely removed because of a clip that holds the wiring on the back of the maker. The wiring is attached to the back wall in the form of what is called a Molex connector, a white plastic connector. This is probably the hardest part of the job, wiring access. The air deflector blocks any free access, so you have to just grab and depress the prongs to release the Molex from the wall. With wiring disconnected, remove entire assembly. Use a flat-tip screwdriver to pop the white cover off of the front of the maker to use on the new one. Same goes for the wire cube arm that sets out over the ice cube bin, taking the front out first (pulling straightout) then pivot arm 180 degrees and remove from back. Remove wiring harness from front of maker. Re-install on maker, it goes in one direction only, look at the configuration before you pull it out, and put in the same way. Make absolutely sure you re-install it so it clicks in all the way. If not, it won't work. I had to remove the ice maker again because I did not make this connection properly the first time. So I did the whole job twice. You have to put the job back in reverse of the way you took it out. The new one works great. I should have done this about a year ago. The old one had been making a noise and I ignored it.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 3 people found this instruction helpful

Parts Used:
  • Replacement Ice Maker
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Nutdriver
Customer: Gene N from Summerville, SC

Ice maker quit making ice. Motor was not pulling water in.

I found your website with the step by step video on how to replace the ice maker on my refrigerator. It looked really simple, so I ordered the part from you and it was here in 2 days. It absolutely took less than 15 min to remove the old ice maker and replace it with the new one----and it works. You helped me save close to $200.00. Thank you!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?