BBB A-Plus

Wall Vent Cap Kit - 5" duct - with Gray Cover

PartSelect Number PS2105196

This wall vent cap kit comes with a spring loaded damper. This part can be painted.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

In Stock

  • Compare At

    $41.46

  • You Save

    $6.91

  • Your Price

    $34.55
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-4 of 4

 

4 of 5 people found this instruction helpful

Parts Used

    • Wall Vent Cap Kit - 5" duct - with Gray Cover

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers

CustomerRobert from Jacksonville AL

Didn't like the appearance of a cheap-looking dryer vent on an exposed area of my new house.

I enlarged the vent access hole from four (4) inches to five (5) inches to accomodate a larger pipe. I then purchased locally a 5" to 4" transition and installed it in the enlarged opening, and sealed the space with expanding foam for a bug-proof air-tight fit. On the inside of the house I attached a short length of 4" pipe to attach the dryer vent pipe. On the outside, in the place of the aluminum vent cap, I installed the 5" Jenn-Aire vent cover purchased from PartSelect.com. The new vent is large enough to completely cover the chiseled out masonry area, and the 5" outlet reduces air noise from the dryer, but best of all the new vent provides the high quality look I needed to match the brick of my new home.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerGayle from Rockport TX

Hail storm destroyed outside jenn-air vent cap

Took the old cracked, chipped vent hood off and screwed on the new vent cap with the new stainless screws included.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 5 people found this instruction helpful

Parts Used

    • Wall Vent Cap Kit - 5" duct - with Gray Cover

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJim from Sulphur OK

Wall vent cap & damper were broken.

Attached spring to damper, placed on existing 5" duct and secured. Used screwdriver to attach vent cover to damper.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

    • Wall Vent Cap Kit - 5" duct - with Gray Cover

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerRobert from Shaker Hts OH

Broken vent cap

Unscrewed old cap, installed new

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-4 of 4