| |
42 of 809 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set, Wrench set
CustomerRONALD from COLUMBUS OH
Hinge broke so wife wanted new range started checking prices of new appiances
Started shopping local appliance parts stores and found partsselect.com on line they beat local stores as far as prices even after shipping.
|
27 of 1086 people found this instruction helpful
Parts Used
-
- Radiant Element Cartridge
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerVera from Moran TX
Wanted an updated look
Unplugged the old cartridges and plugged in the new ones. Not one thing to unscrew. Everything went well. Service from Partselect was beyond belief and delivery was alsolutely beyond my imagination. Placed order on Thursday afternoon right before 5 o'clock -- delivered to my front (way out in the countryside) before 9 o'clock on Saturday Morning from Abilene, Tx which is 50 miles away.
The entire experience went PERFECT!!!!!! Hope nothing needs any repair but when and if I will order from Partselect.
|
289 of 1957 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerMomo from Milpitas CA
Old parts were in bad shape
very simple removal of the old and easy instalation of the new cartridge w/o any tools.
|
36 of 1278 people found this instruction helpful
Parts Used
-
- Radiant Element Cartridge
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerbill from dallas TX
Needed radiant element cartridge
Just plugged in cartridge, 10 seconds.
|
36 of 1285 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRon from Centennial CO
Old cooktop burner no longer worked and looked worn
Removed the old cooktop modules and plugged in the new radiant cooktops. Had a new cooktop in less than 15 minutes and saved considerable dollars.
|
37 of 1291 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerWendell from Manchester MI
The clock/oven no longer displayed numbers/text
One of the easiest repairs I've done in a long time!
First I turned off the power to the oven at the power box.
I removed 4 hexhead screws holding the front contol panel on. Tipped it out, and then removed 2 hexhead screws to remove the clock module and unplugged the wires. Reversed the sequence and
turned on the power again.
The trickiest part was checking how the wires were held in - easing the catches back while gently working the wires out.
I also replaced a grill element with a new radiant element cartridge. That was easier than replacing a lightbulb.
|
36 of 1313 people found this instruction helpful
Parts Used
-
- Radiant Element Cartridge
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRay from Pinetops NC
The range burner cartridge would not heat unless you pulled it out several times and plugged it back into the socket. In addition the element was not heating well.
Only repair needed was to simply unplug the old burner carridge and plug in the new one. The new one is FANTASTIC.
It gets hot as soon as you turn it on.
|
36 of 1319 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerSimon from Federalway WA
Burner swiths two, and radiant element cartridre has been problem in and out for month.
replaced switchs and cartridge, looks like bland new for spending 350 instead of new one for 1500. thank you for the parts i needed it.
|
54 of 1987 people found this instruction helpful
Parts Used
-
- Radiant Element Cartridge
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customerkimberly from rochester NY
The stove looked ancient but ran great.
I ordered 2 Radiant Element Cartridges to replace the original element cartridge and a coil cartridge. In less than 8 minutes my 20yr old stove looked brand new.
|