2100601-1-S-Whirlpool-99003317-Detergent and Rinse Aid Dispenser
2100601-1-S-Whirlpool-99003317-Detergent and Rinse Aid Dispenser 2100601-2-S-Whirlpool-99003317-Detergent and Rinse Aid Dispenser

Detergent and Rinse Aid Dispenser

PartSelect Number PS2100601

This part releases the detergent and rinse aid into the dishwasher.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not dispense detergent.
  • Door latch failure.
  • Not cleaning dishes properly.
  • Leaking.
  • Compare At

    $111.44
  • You Save

    $18.57
  • Your Price

    $92.87
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 8 reviews What's this?
1-8 of 8
 

12 of 16 people found this instruction helpful

Parts Used

  • Detergent and Rinse Aid Dispenser

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerHans from Show Low AZ

Dishes still dirty, soap remained in dispenser.

After repairing this dishwasher 5 times during the past 8 years this one was real easy: Open door, unscrew inside cover and carefully move over to one side. Unplug soap dispenser, unscrew soap dispenser and remove. Fit new dispenser, reconnect it, put inner cover back in its place and secure it with the retained screws and you are back in operation. Hans.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 8 people found this instruction helpful

Parts Used

  • Detergent and Rinse Aid Dispenser

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Socket set

Customerpaul from spring hill TN

The soap dispenser wouldn't open during cycle

I unscrewed the door panel. removed the plastic cover protecting the dispenser. unscrewed the dispenser (6 screws). I removed the old dispenser and put the new one on and put it all back together. It was pretty easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

6 of 7 people found this instruction helpful

Parts Used

  • Detergent and Rinse Aid Dispenser

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerPaul from Austin TX

Closer tab on the door broken.

All that was broken on the old detergent dispenser was the door but the door can not be ordered without buying the whole detergent/rinse aid assembly. When I got the new item I just removed the old door and replaced it with the new door that I had taken off the new one. I still have the new detergent/rinse aid assembly that I can keep if I need to change it in the future.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 6 people found this instruction helpful

Parts Used

  • Detergent and Rinse Aid Dispenser

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerRonald from Longmont CO

Latch on soap dispenser door broke

I pulled the AC to the device, took the door apart , unscrewed the mounting to the door, unplugged the wires to it, plugged the wires on the new part, screwed it to the door, and finally put the door back together. Oh yeah, had to plug AC back in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

4 of 7 people found this instruction helpful

Parts Used

  • Detergent and Rinse Aid Dispenser

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerStuart from Rockaway NJ

Rinse dispenser was clogged and unusable.

I remove the inner door panel, disconnected two quick release connectors, unscrewed the old part from the inner panel and installed the new one.

The new part arrived quickly and was the perfect match.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Detergent and Rinse Aid Dispenser

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

Customerfred from henderson NV

Detergent dispenser door latch not holding

from inside the door remove torx screws down each side and top , pull panel back , removed 6 screws from back of dispenser ,unplug 1 wire connection ,reverse procedure , real easy repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

  • Detergent and Rinse Aid Dispenser

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsSocket set, Wrench set

CustomerJoan from New York NY

Dispenser latch had broken

We unscrewed the inner door panel and pulled it apart, disconnected the wiring, removed the screws holding the dispenser in place and swaped it out. One problem we had putting everything back together was that the latch for the door didn't line up and we couldn't shut the door but we simply unscrewed the door, readjusted the latch and put it back together. Works great now!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 8 people found this instruction helpful

Parts Used

  • Detergent and Rinse Aid Dispenser

Level of DifficultyVery Difficult

Time to do repair:More than 2 hours

Tools

CustomerDavid from Anoka MN

Broken dishwasher detergent apparatus

n/a

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-8 of 8