| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
Customeredward from silver spring MD
Upper wheel rack broken
I just popped it off and replaced the new part. Only had 1 broken wheel but bought 4 just to have.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
Tools
CustomerPAM from GRAPELAND TX
Plastic parts broken
Everything just snapped in to place.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDonald from East Walpole MA
Broken wheel on upper rack
It was very easy to replace the wheel assembly. A single snap lever allowed removal of the broken assembly and the replacement assembly from PartSelect fit and snapped in place to complete the repair.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerDOUGLAS from MACOMB MI
Broken wheel on upper rack
Removed end caps on guide rails of rack, slid upper rack out of dishwasher, popped off broken wheel, snapped on new wheel, slid rack back into guide rails and snapped in end caps of guide rail. Very easy to do.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJohn from Hixson TN
Top rack roller broken
Removed top rack hold clips and slid out rack. Unclipped broken roller and clipped new one back in its place. Also replaced other three rollers and saved 3 old rollers in zip lock bag for future repair if needed.
Selecting the correct part at the part Select web sitewas easy due to the part diagrams for each model appliance.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerRichard from Hoffman Estates IL
Old wheel disintegrated
The old part unclipped , the new one clipped on .
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerJon from Marietta GA
Top shelf wheel broke
Very simple! First, free the wheel from the rail - should come right out if the wheel is broken. Then click the wheel base off the small shelf rod by rotating the wheel bse. Then, click the rail end cap off the rail by pressing it through the small square hole in the flat side of the rail. Insert the wheel into the rail, then click the wheel base back onto the shelf rail rod where you took the old one off. Click the rail end cap back on, and you're done!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerIrene from Carlisle PA
Broken wheel on top rack
We removed the two ends from the top rack, removed the broken wheel and put the other in its place. Very easy! Very prompt shipping.! I'll buy again from you when I need a part, Thanks!
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsPliers
CustomerRonald from Marysville PA
A few small broken plastic parts.
Very simple replacement of snap-in parts. The key was in finding those parts and PartSelect made that easy.
|