2100439-1-S-Whirlpool-99003147-Upper Rack Wheel
2100439-1-S-Whirlpool-99003147-Upper Rack Wheel 2100439-2-S-Whirlpool-99003147-Upper Rack Wheel 2100439-3-S-Whirlpool-99003147-Upper Rack Wheel http://www.partselect.com/Schematics/Maytag/Maytag_Thumb/58811.gif

Upper Rack Wheel

PartSelect Number PS2100439

Sold individually.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t close.
  • Not cleaning dishes properly.
  • Noisy.
  • Door latch failure.
  • Compare At

    $7.55
  • You Save

    $1.26
  • Your Price

    $6.29
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 24 reviews What's this?
1-5 of 24
 

468 of 471 people found this instruction helpful

Parts Used

  • Upper Rack Wheel

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerAnthony from Greenwich, CT

Replace wheel

Tghe old one snaps off and the new one snaps right in .

Help other customers find the most helpful instructions.

Were these instructions helpful?

442 of 521 people found this instruction helpful

Parts Used

  • Upper Rack Wheel

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerBruce from Topeka, KS

Upper wheel rack broke

This was very easy to fix, just pop out the old one and install the new one. I saved $60-$75 on a repairman coming out to fix the thing in 5 minutes. Truly, I received the part from PartSelect in two days after placing the on-line order. We were up and running in between loads.

Help other customers find the most helpful instructions.

Were these instructions helpful?

222 of 428 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Socket set

CustomerCHRISTOPHER from Spalding, NE

Wash quality was getting bad

The upper arm was held in by a torx screw. The shoulder on the screw held the arm in place. Once removed I simply swapped parts and installed screw. The lower arm was held on by a plastic nut with knurled edges that you can remove by hand. The arm simply lifted off and I swapped arms again. The rollers are held on by a curled plastic lock that grips the wire basket.

Help other customers find the most helpful instructions.

Were these instructions helpful?

184 of 325 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:More than 2 hours

Tools

CustomerGilles from Cypress, CA

Machine not cleaning, leaving crud on dishes. The old accumulator filter was punctured and full of crud. One broken wheel from abuse.

Take out the old parts and clean all the ones to be reused by power washing with garden hose and/or compressor blasting. Put it all back together. BE VERY CAREFUL NOT TO PUNCTURE THE ACCUMULATOR FILTER! THE TORX SCREWS ARE RIGHT NEXT TO THE FILTER SO IF YOU SLIP AND DROP THE TOOL, THE FILTER WILL BE TOAST!

THE DISHWASHER WORKS PERFECT NOW!

Help other customers find the most helpful instructions.

Were these instructions helpful?

140 of 217 people found this instruction helpful

Parts Used

  • Upper Rack Wheel

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

Tools

CustomerGeorge from Farmington Hills, MI

Upper rack support wheel

Removed the old broken wheel and popped in the new one. The best part of the entire problem was searching this website and finding the part quickly. Granted the shipping was almost double the price of the part, but still under $15. Searching and delivery of the part was fantastic.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 24