2100308-1-S-Whirlpool-99003011-Rack Adjuster Cover
2100308-1-S-Whirlpool-99003011-Rack Adjuster Cover 2100308-2-S-Whirlpool-99003011-Rack Adjuster Cover

Rack Adjuster Cover

PartSelect Number PS2100308

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $6.24
  • You Save

    $1.04
  • Your Price

    $5.20
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Rack Adjuster Lever

Part Number 2100470

$25.65
In Stock

Rack Adjuster Stabilizer

Part Number 2100317

$4.75
In Stock

Screw

Part Number 2062401

This screw is sold individually.

$5.57
No Longer Available

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 4 reviews What's this?
1-4 of 4
 

5 of 6 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerKayla from Lincoln NE

Wheels on left side of middle rack broke.

Initially ordered the rack adjuster assembly, not realizing that I would also need the adjuster lever and adjuster cover, too. This piece is NOT what originally came with our unit. The line drawing for part 17 shows what our unit looks like. That part has apparently been discontinued and we were guided by Maytag to order this substitution, which is actually a Whirlpool part. Thought someone else might want to know this if they happen to have the same series of Maytag DW as we do. It fits well onto the rack, however, the location of the wheels on the unit are different than the original which means that the middle rack now slides out of the dishwasher about 3" less than it used to, which is kind of a bummer. All that said, the repair was a piece of cake and the hubs on the wheels are now metal instead of the original plastic. . .I expect this part to last a good long while!

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerJames from Canonsburg PA

Broken wheel in rack adjuter

I propped up the dishwasher rack. I opened the stopper at the end of the track, just move it in the direction of the arrow. I removed the right side rack adjuster. I put the rack into the track, put the lever in the adjuster cover and put the cover in place. I replaced the screws and closed the stopper. I found it very simple for a female with limited repair experience, but I saved hundreds of dollars doing it myself.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerLarry from Solon IA

Upper rack wheel broken

Four screws were removed and new parts were installed. The only problem was that two types of rack adjusters exist. If your dishwasher does not have a lever, part number PS2100470, then the new rack adjuster either left or right side will not work without part numbers PS2100470(lever) and PS2100308(cover). Be sure to order parts for both sides since the original plastic wheel supports have been replaced with steel.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

Tools

CustomerKenneth from Lake Orion MI

Wheels broke off rack

I removed screws from rack adjuster, installed new adjuster, and replaced screws (required torx driver).

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4