| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerGinger from Arlington VA
Handle broke on dishwasher
Removed old latch by removing back of door, unscrewed old handle which (big chunk missing) and replaced with new handle.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
ToolsScrew drivers
Customertom from goodyear AZ
Latch handle broken
sat down with a beer to evaluate problem. removed torx screws from inside of dishwasher. tried using beer to hold door down. spilled beer, so needed another. removed 2 screws holding handle on and spilled beer looking for them. attached handle and installed inner panel. all-in-all pretty good !!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerDelores from Riverside CA
Plastic latch handle cracked
I followed the steps outlined by other consumers on the web site. It was very easy except that one screw was stripped and difficult to remove; hence the pliers. Had to hold the screw with pliers so that I could remove it with screw driver. Other than that, it was a snap.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerTerrance from Friendswood TX
Original plastic latch handle split and broke.
Removed the 10 screws from the back of the door, them removed the two screws holding the latch handle in place. Put the new handle in place and reversed the procedure.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers, Socket set, Wrench set
CustomerGeorge from Millstone Township NJ
Oven doors did not close always slightly open
First I removed the screws that hold the oven doors. I than removed the oven doors from the oven and took them apart. I unscrewed the old hinges and replaced them with new ones. The old ones were bent when they were installed.. Once the new hinges were on I put the doors back on and the oven doors closed perfectly. I was than able to use the automatic oven cleaner on the lower oven for the first time since the doors closed tight. I spent less than $ 200. to fix it and saved over $3,000. by not having to buy a new double oven. Great company and I did not have to call a repair man who would have told me to buy a new oven.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerLouis from Trinity FL
Door handle was broken
Piece of cake. I removed the 10 strar type screws from the door frame, removed the old handle and replaced it. about 15 -20 minutes of my time.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
Tools
CustomerAllan from Katy TX
Handle broken
Removed 10 screws on back of door. Removed two screws from broken handle. Installed new handle with previously-removed two screws. Replaced back of door. Snap if you have a Torx driver of the correct size.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
CustomerHershel from Fort Worth TX
Broken handle to open the door
Remove all screws holding the inner panel and lift the inner panel exposing the screws holding the handle. Remove the screws holding the broken handle, replace the handle with the new part and re-assemble.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Wrench set
Customercathy from cary NC
Handle broke
unscrewed back of dishwasher off, screwed new handle in place
|
1 of 8 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:15 - 30 mins
ToolsScrew drivers, Socket set
CustomerMatthew from Morris IL
Handle and door cable were broken
Had to take door apart to put new handle on, and then pull out the unit from cabinet to put on the new cable. But door do longer slams open. So Happy that it is now fixed.
|