| |
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMARIA ELENA from DELRAY BEACH FL
Door wouldn't shut
visually compared door shutting parts to parts on webside it was visibly obvious that there was wear and tear and shape alteration. Order parts inserted on same spots old parts were removed from, screwed on and done!
It was very easy to order, received parts very quickly and saved a lot of time searching around town to find the parts needed.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDennis from Seminole FL
Door wouldn't open easily
Removed screws holding the inside panel of the door to the door. Took out the broken handle and put screws back in. Really easy!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
Tools
CustomerArthur from Monroe NJ
Plastic door release latch handle cracked.
First I bought a 'star' pattern driver; all I had in my tool box were allen keys. Next, I killed the dishwasher power at the breaker. Then I removed ten screws from around the door assembly, and gently pried apart the inner panel from the door. This exposed the latch assembly at the top of the door. I pulled the latch assembly off its snap mount and the broken latch handle fell out. I inserted the new part and snapped the assembly back in place. Then I jockeyed the inner panel back into position and replaced the eight screws.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerPaul from Peculiar MO
Handle latch broken
Removed the screws holding the front panel onto the door (1.5 min). Separated the panel from the door (.5 min) popped old handle off (.25 min) snapped new handle on (.25 min) put panel back on (.5 min) replaced screws (1 min) Test handle action (1 min). Done in 5 min.. easiest repair I have done and the total savings was huge compared to service call or a new appliance.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJOHN from MARYSVILLE WA
Door handle broken (internally) , couldn't open the door, easily
I took the door apart the first time cautiously ( 30 min ) to find the problem.i.e. the pivots on each side of the internal handle mechanism were sheared off from wear / time. Then I put it back together so it worked well enough, looked on -line to find the PN (easy) , and ordered it. The ordering process was clean and simple. The shipper took the order on line, emailed me the part was on order, gave me a ship-date , told me when it was shipped and the date it was supposed to arrive , the part arrived on time. Each time I got an email from the shipper it contained the part no.& description , confirmation no. and shippers I.D.. That kind of communication adds a large amont of confidence to any business deal. --- I forgot, the installation took less than 15 minutes after I received the part. I removed 12 s.s. screws, dropped two ( hence magnet) , installed the handle, put back the 12 screws & voila, job done. The door works like new.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsPliers, Screw drivers
CustomerKenneth from Pine Island MN
Plastic handle broke. Could not open the door.
Disconnect the power. Remove the door pannel. Disonnect the 2 micro switches on the latch assembly. Remove the latch assembly. Compress the latch assembly with the channel locks and insert the new handle pivots which broke on the old one. Reassemble the micro switches and reassemble the door panel.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJames R. from Purcellville VA
Door latch broken --- door very hard to open
Disconnected power to unit. Removed torque screws of inner stainless liner. Removed door latch unit by gently lifting it up and out of bracket. Found the broken latch handle and removed it by gentley popping it out of side socket holes. Installed new handle. Easy Fix. Part was exact replacement.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerAnn from Wells ME
Door handle broken
remove door panel insert new handle part, return door panel, screw in place. done in no time. ordering parts and customer service very helpful.
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
CustomerDexter from Westborough MA
Latch mechanism/handle broken
removed screws
disassembled door panel
installed new handle, switch and control panel
reassembled door panel
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsSocket set
CustomerMary Beth from Lincoln NE
Plastic door latch broken
Took off inside door part and attached new plastic piece. Super simple and for under $15 works and looks like new.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJohn from Moorpark CA
Handle was broken
Removed approximately 10 screws and then removed the inside panel. Once the panel was removed, the handle was easy to replace.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerGUY from HOUSTON TX
The handle doesn't work
only change the piece, it was very simple,thank you, for your help
|
0 of 3 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerFrank H from Cranston RI
Latch would not open without jiggling
OK! I'm 81 years old but thought I would give it a try. First BE SURE to unplug from the wall and throw the breaker or fuse. (I only pulled the breker and got a slight shock when trying to remove the broken piece.)Remove all the screws ang pull the metal panel from the door slightly. The door latch unit is fastened to the door by a snap bar gently pull away and you can remove old door handle. Snap the new one in place. For me this was the most difficult step. Snap the latch unit back in place; replace screws[ and your done. In just twenty minutes. NOT BAD FOR AN OLD PREACHER MAN. 7/30/11
|
0 of 5 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerHarry from Benton City WA
Electrical short in the wiring harness to the door
Had to remove the door and butt splice 5 wires. Found the vent seal was leaking and door handle was broken replaced both along with broken lower wheel.repairs took about 15-30 minutes.
|