BBB A-Plus
2100159-1-M-Whirlpool-99002828-LED-Control-Board.jpg
2100159-1-S-Whirlpool-99002828-LED-Control-Board.jpg 2100159-2-S-Whirlpool-99002828-LED-Control-Board.jpg 2100159-3-S-Whirlpool-99002828-LED-Control-Board.jpg

LED Control Board

PartSelect Number PS2100159

This part is located in the control panel.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not start
In Stock
Recycling Rebate Available

  • Compare At

    $287.34

  • You Save

    $47.89

  • Your Price

    $239.45
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-1 of 1

 

1 of 4 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Socket set

CustomerJoseph from Dover DE

Touch pad inoperable and latch hande & latch broker

Disassembled inside door and replaced sensor board and latch devide and handle. I removed all the screws on the inside of the door, released the circut board(sensor board or control board) and removed each connection one at a time and pluged them one at a time into the new board. I studied the setup before I disconnected anything. Oh yes, I turned off the breaker in the basement before opening the panel on the inside of the door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-1 of 1